Примеры использования The repeater на Английском языке и их переводы на Русский язык
{-}
-
Colloquial
-
Official
I'm at the repeater.
It will take you directly up to the repeater.
Below the Repeater and manual.
Those“numbers” It is only to configure the repeater.
There's the repeater on my decision!
Люди также переводят
But if you log in you can see the repeater settings.
Put the Repeater connected directly to a computer.
Listen for the information which is transmitted by the repeater.
Already restarted the repeater, but nothing happens.
Is it possible to put a specific password to connect to the repeater?
Direct connect the Repeater to the PC, without router.
Check the firewall andat worst do a reset on the repeater.
Without the repeater, the signal won't penetrate solid rock.
Two different receiver modules can be installed into the repeater- R7 or R11.
In the figure below the Repeater is plugged in looking for WiFi network.
Try to keep the RESET already pressed when connecting the repeater.
Try to reset the Repeater, reset the settings to the default.
System: Stabilisation and protection of the input voltage in the repeater transmission system.
Inside the box we have the repeater, an Ethernet cable and a manual.
Use the repeater/splitter GW85692 to increase the number of devices that can be managed.
Connect the computer directly to the Repeater and type the command ipconfig at the ends.
Using the repeater/splitter GW85692, it is possible to increase the number of devices that can be managed.
I turn my repeater in the making and will not appear the repeater Wi-Fi network on your computer which could be?
I configure the Repeater, Elle repeats a signal but a limited signal what do I do?
Type the other's AP/Router's SSID in the“SSID of Extended Interface” field that the repeater want to connect.
Inside the package we have the repeater, an Ethernet cable and a few small manual.
Below is the contents of the package: a manual, a European standard AC adapter(which is equal to the Brazilian),a RJ45 cable and the Repeater itself.
Try to configure the Repeater using a internet explorer browser old(like windows XP or 7).
Never leave the Repeater too close from the main WiFi network, or your signal will cause interference, not too far or it will not be possible to repeat.
To make the first setting you should fit the Repeater in the socket and connect the ethernet cable(Blue) between the device and your computer.