Приклади вживання Air intake Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Silicone Cold Air Intake.
The air intake for NACA tunnel number one.
The film is pre-prepared- pierce holes for air intake.
Maximum Air Intake: 1200 L/H.
It is important to balance the pump output with the air intake of the skimmer.
Air intake pipe located in the left side.
This contributes to an increase in the working surface 2 times and the air intake area.
The rubber air intake hoses meets the requirements of SAE J20 specification.
Supplying high performance silicone air intake hose with competitive price.
Natural air intake through air duct with water separator(1 each side).
These models are equipped with a sliding panel, thereby increasing the air intake surface.
The airflow system is lower: the air intake passes through the nozzles and goes directly to the coils.
In particular,the medicine withdraws in the syringe should be performed without air intake with the medicine.
Making silicone hose pipe for cold air intake system of auto industrial application.
For this purpose it is necessary to establish a set of,which by and large is necessary only for air intake.
It is best to slightly overskim with this skimmer and be careful to adjust the air intake properly for good foam.
StoreVent matches the size of extraction fan and air intake to the amount of air expelled from Pile-Dry crop ventilating fans.
On the side of housing cover, which opens by simply turning handle large,there is an opening for air intake, equipped inside the duct.
Cobra Head Silicone Hose is built for air intake or air filter, turbo inlets, compressor inlets applications.
To ensure operation of the engine in the submerged positionAtlet ARRV is fitted with two pipes for air intake and removal of exhaust gases.
The DF175AP/DF150AP incorporate an air intake resonator that reduces such noise keeping operation exceptionally quiet.
Industrial insulating gas masks are also hose gasmasks consisting of masks and long rubber hose for air intake from non-infected areas.
The MiG 1.44 air intake is located under the fuselage, it is divided into two sections, each of which supplies air to one of the engines.
Muscular front bumper, equipped with a dark inset, air intake with horizontal slats, as well as niches with built-in"foglights";
If the level of harmful substances detected is deemed too high- such asthe instance of driving through a tunnel- the car's air intake closes automatically.
It consists of air intake, inlet chamber, filtering chamber, ash bucket, discharge vavle, outlet, counter blowing system and soot cleaning system.
If the level of harmful substances detected is deemed too high, e.g. if youhappen to be driving through a tunnel, the car's air intake closes automatically.
Silicone intake air intake silicone air intake silicone intake pipe in silicone intake hose in silicone silicone intake hose.
When planning to arrange a homemade snow-plowair-cooled engine,it is imperative to provide additional protection from the air intake holes emitted in the process of fine snow particles.