Приклади вживання Ash cleaning Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
(2) the effect of ash cleaning is good.
Ash cleaning method for dust collection at bottom of filter bag of dust collector.
Gas cleaning includes pulse jet cleaning, reverse blowing and ash cleaning.
Separate room and continuous pulse ash cleaning to solve the problems of long cycle and two sorption.
The Dust Collector system consists of control system, injection system,filtration system and ash cleaning system.
Wet ash cleaning can prevent the dust from catching up again and achieve high dust removal efficiency.
Then switch the valve plate open,filter unit rework, ash cleaning will turn to the next filter unit.
Ease of operation and design compactness with sufficientlyhigh levels of flue gas desulphurization and ash cleaning; .
Therefore, the ash cleaning method is one of the distinguishing features of bag filter, and is also an important part in the operation of bag filter.
Compared with the other single machine in China, it has the characteristics of large ash clearing and kinetic energy andhigh efficiency of ash cleaning.
The use of separate room air blast pulse ash cleaning, long ash removal cycle, low consumption, can double the life of filter bags and valves.
The main structure of Bag Filter is mainly composed of upper box, middle box,lower box(ash hopper), ash cleaning system and ash removal mechanism.
The upper part of the dust filter system connects with the pulsing ash cleaning system and the filter air discharge system, the lower connection ash discharge system, and the pulse blowing blowing system.
Single machine pulse duster is a large dust removal equipment with high dust removal efficiency, good economic benefit,low air leakage rate and long ash cleaning cycle.
LFEF dryer deduster uses microcomputer to control thecounter blowing timing constant resistance and ash cleaning temperature detection and display so as to make the glass fiber bag dust collector run efficiently and steadily in the dry flue gas….
Ash cleaning device There are two kinds of dust cleaning methods in the traditional filter one is high pressure air blowing and the other is pulse air jet The practice shows that the advantage of the former is that the air flow is uniform and the….
Use the bag cage with defects Bag cage is a kind of installation accessories that can keep allkinds of filter bags under the condition of filter and ash cleaning It is the bone of the filter bag The quality of the bag is directly related to the….
Technical measures 1 ash cleaning device There are two kinds of dust cleaning methods in the traditional filter one is high pressure air blowing and the other is pulse air jet The practice shows that the advantage of the former is that the air flow….
When the dust skeleton is used for a period of time a lot of dust will appear on theequipment so the equipment needs to carry out regular ash cleaning so that it can be very effective under the economic resistance conditions the concentration of….
Dust collected on the platecan be washed down by water Wet ash cleaning can prevent the dust from catching up again and achieve high dust removal efficiency Because of no vibration device the operation is also more reliable The device that uses….
The working principle of the pulsate bag dust collector of the boiler The boiler pulse bag filter is composed of ash hopper upperbox middle box cloth bag ash cleaning and blowing device When working the high temperature flue gas flows into the ash….
Ash cleaning method for dust collection at bottom of filter bag of dust collector 1 gas cleaning gas cleaning is by means of high pressure gas or external air filter bag to remove dust on filter bags Gas cleaning includes pulse jet cleaning reverse….
Therefore, it is necessary to carefully study the properties of dust and dust concentration, and determine the period and time of the dust cleaning according to the different methods of dust cleaning, and adjust the better ash cleaning parameters in the trial operation.
The structure of the bag should meet the requirements of the filter and ash cleaning of the bag type dust collector matching with it, and it is easy to install, reliable in sealing, to pursue the corresponding filter area and good filter state, easy to clear ash and to avoid wear as far as possible.
The filter material should be considered according to the temperature, temperature and chemical characteristics of the gas, the size, weight, shape, pecking property, dust concentration,filtration speed, ash cleaning method, discharge concentration and working system of bag type Dust Collector.
First, the air box pulse bag type dust collector, which sets the advantages of the dust collector such as the chamber back blowing and the pulse injection, overcomes the shortcoming of the low kinetic energy intensity in the chamber back blowing,and the disadvantages of the filtration and the ash cleaning simultaneously.
When the dust skeleton is used for a period of time, a lot of dust will appear on the equipment,so the equipment needs to carry out regular ash cleaning so that it can be very effective under the economic resistance conditions, the concentration of dust in the equipment and the properties of the dust should be carefully studied.
It will cause the filter to bear the negative pressure at one end(upper part) near the pulse valve, and the other end(lower part) of the filter will bear pressure, which will cause the different cleaning of the upper and lower parts of the filter and may shorten the service life,and make the equipment fail to achieve effective ash cleaning.
Cleaning ash from parasites: home purification methods.
In addition, acquiring such a fireplace,you save yourself from the extra hassle associated with cleaning the ash and cleaning it from soot.