Приклади вживання Carbon content Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The carbon content in this steel is around 1%.
Hardness of steel which comes from high carbon content.
Low carbon content(not more than 0.15%);
We offer Ukrainian natural graphite with high carbon content.
On the carbon content changes the properties of steels.
The figure may not be present at a carbon content of about 1%.
Coal with carbon content of more than 97% is super anthracite.
It is characterized by high density and carbon content of 93- 95%.
Due to low carbon content, 316L is more resistant to corrode.
It also has great weldability, thanks to its low carbon content.
The carbon content of carbon steel balls is less than 1.35%.
I is the steel to continue to reduce the carbon content based on 316.
The carbon content also changes the performance of the carbon steel ball.
AISI 304L is low carbon contained material, its carbon content below 0.03%.
With such processing, the carbon content decreases, it is said to burn down.
Results of the fatigue tests of steel specimens with different carbon content have been presented.
Therefore, the carbon content in the stainless steel must be kept to a minimum(not more than 0.1%).
As the recarburiser for the metallurgical industry to increase the carbon content in the iron-carbon melts;
Higher carbon content causes greater deposition of iron sulfide, which appears as a black varve.
This charcoal is characterized by high carbon content- more than 75%, low ash, nitrogen and sulfur content. .
Carbon content in this type of coal amounts to 75% and more, in some cases it can be more than 95%.
L is a variety of 304 stainless steel with low carbon content, which is used for places need welding.
The carbon content in it is higher than in wood(about 52 wt.%), while the ash content is less than 1%.
L is a variety of 304 stainless steel with low carbon content, used for occasions where welding is required.
The carbon content is below 0.03%, so it will reduce carbide precipitate(sensitization) and result in better intergranular corrosion ability.
With equity: Collaborate with utilities, customers and stakeholders to reduce the carbon content in a city's electricity mix;
And the material of 316Lstainless steel ball has lower carbon content than 316 stainless steel ball which makes them have better performance of corrosion resistance and antirust.
The main indicators of its quality are the content of carbon and ash-the higher the carbon content and the lower the ash content, the higher the quality of graphite.
And the material of 316Lstainless steel ball has lower carbon content than 316 stainless steel ball which makes them have better performance of corrosion resistance and antirust.
Initial EDF analysis found a maximum excess carbon content of 0.3%- about 50% more than the design specification of 0.22%.