Приклади вживання Metal surfaces Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Effectively degreases metal surfaces.
All metal surfaces were painted in 2 layers.
Successfully used for metal surfaces.
It is possible to polish metal surfaces with it much faster and more qualitatively.
Can only be applied on metal surfaces.
Metal surfaces shall be thorougly cleaned of corrosion with wire brush, sandpaper.
It is also found on metal surfaces as well.
Several other nuances should be considered in working with metal surfaces.
Do not cause corrosion on metal surfaces of rubbers and elastomers.
In addition, it adheres very well to metal surfaces.
But plastic and metal surfaces will look great in modern design projects.
Do not forget to flaunt the metal surfaces.
Previously non-coated metal surfaces shall be undercoated with Alkyd primer GP-021 TM"DekArt".
Popular imitations of wood or metal surfaces;
Metal surfaces shall be thoroughly cleaned from corrosion with a wire brush, sandpaper.
And perform very well on metal surfaces.
Previously non-coated metal surfaces shall be undercoated with anticorrosion primer GP-021 TM Farbex.
For example, well looks appliances with metal surfaces.
For protective decorative painting metal surfaces with corrosion traces up to 100 microns.
These types of paints are suitable for painting wood and metal surfaces.
The high level of adhesion to metal surfaces, concrete and asphalt.
He loves to work with food and liquids, glass, and metal surfaces.
PF-115 solution for wood and metal surfaces- it creates them glossy coating.
The enamel of this categoryis designed to cover the thoroughly primed metal surfaces.
Transparent varnish, designed to cover metal surfaces, can be very different.
Only in this case the preferred kitchen gloss colors vanilla and metal surfaces.
Consumer electronics is selected from metal surfaces, but it is permitted and absolutely white.
It is ideally combined in the interior of glass and metal surfaces of devices.
Can be used for painting metal surfaces with residual rust, as well as in combination with different types of primers.
He even devised techniques for scraping clean the metal surfaces inside the vacuum tube.