Приклади вживання Polyvinyl chloride Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Hose of polyvinyl chloride(1 m).
Tiles made of plastic made of polyvinyl chloride.
Polyvinyl chloride(PVC) compounds.
Lines for the production of polyvinyl chloride plates.
Polyvinyl chloride, not mixed with any other substances.
The film for the Stepstar consists of polyvinyl chloride.
Polyvinyl chloride film(PVC)- optionally covering panel.
MDF-plates, coated solid and dense film of polyvinyl chloride.
PVC polyvinyl Chloride, qualities of light yellow translucent and shiny.
Composition of the wallpaper: the base paper and a layer of polyvinyl chloride.
Construction of production of polyvinyl chloride suspension PVC-C(2008-2011).
It is best to impose its tiles or perform tensioning of polyvinyl chloride.
When heated, polyvinyl chloride acquires plasticity, so working with it is a pleasure.
Which pipes should be preferred, polypropylene or polyvinyl chloride(PVC)?
All types of polyvinyl chloride linoleum can be divided into two types according to their structural composition:.
They are named this because they have been made using a stuff called Polyvinyl Chloride, shortened as PVC.
Polyvinyl chloride is known as PVC which is a thermoplastic polymer which has replaced rubber in many applications.
They are named this because they can be made using a material called Polyvinyl Chloride, shortened as PVC.
Milling of PVC or polyvinyl chloride contains milling of composite material that is often used in outdoor advertising.
They're named this due to thefact that they're generated with a material called Polyvinyl Chloride, shortened as PVC.
Natural or polyvinyl chloride, Phenol, kolloksilinovy, rubber- this is an incomplete list of the types of flooring available to the modern consumer.
They are made of polyurethane that does them on 40 easier,than usual boots or working footwear of polyvinyl chloride.
Many people are alerted by the"chemical" name of material, polyvinyl chloride(PVC) and that in the process of production lead is added in plastic.
Polyvinyl chloride was observed by chance on two occasions during the nineteenth century, first in 1835 by Henri Victor Regnault and then in 1872 by Eugen Baumann.
Many people are concerned with the“chemical” name of the material- polyvinyl chloride(PVC) and that the lead is added in the process of the production of plastic.
Polyvinyl chloride was accidentally discovered on at least two different occasions in the 19th century, first in 1835 by Henri Victor Regnault and in 1872 by Eugen Baumann.
This value of TSEL is confirmed by the results of epidemiological studies on the investigation of the effect ofplasticizer on workers of different professions under conditions of polyvinyl chloride manufacturing industry.
Lining of plastic is made of rigid polyvinyl chloride(PVC) with the addition of coloring and plasticizing special elements under the influence of high temperatures.
Pay attention: polyvinyl chloride imitates fabric weaving, due to which its density increases, so you can install such a ceiling in the bathroom without fear.
When added to polyvinyl chloride resin, plasticizers, stabilizers and other components increased its physical, mechanical and technological properties, but reduces the dielectric properties of PVC plastic.