Приклади вживання Sodium hydroxide Англійська мовою та їх переклад на Українською
{-}
- 
                        Colloquial
                    
- 
                        Ecclesiastic
                    
- 
                        Computer
                    
Sodium hydroxide- Up to pH 7.0.
Amyl alcohol with sodium hydroxide Do not remove the--.
Sodium hydroxide Regulates the pH of the agent Less than 1.
Inhaling chemicals, such as sodium hydroxide[5].
(c) Sodium hydroxide is a strong base.
Workflow firm comprises mixing air with sodium hydroxide.
Sodium hydroxide(NaOH) is another prototypical strong base.
Ultrasonic extraction of soy protein in water and alkali(sodium hydroxide).
Sodium hydroxide provides hair straighteningmore wavy.
Excipients: sodium  chloride, sodium hydroxide, water for injections.
Sodium hydroxide Adjusting the рН for surfactants to action effectively, saponification of fats less than 5.
Excipients: diluted hydrochloric acid or sodium hydroxide, water for injections.
Application: Sodium hydroxide is chemical basic raw materials.
Auxiliary components of the solution are benzyl alcohol, water, sodium hydroxide, propylene glycol.
Washing with sodium hydroxide solution or using industrial catalysts.
Straightening of hair is done mainly by twopreparations- ammonium thioglycollate and sodium hydroxide.
When iodine and sodium hydroxide are used as the reagents, a positive reaction gives iodoform.
The iron solutionis precipitated with concentrated ammonium hydroxide  and sodium hydroxide respectively.
Sodium hydroxide is also used in manufacturing of sodium  salts and detergents, pH regulation, and organic synthesis.
Auxiliary components of eye drops are sodium  citrate,water, sodium hydroxide, mannitol, hydroxyethylcellulose.
Sodium hydroxide is easily soluble in water, the solubility increases with temperature, can give off a lot of heat when dissolved.
On contact with watersodium  peroxide is hydrolyzed to give sodium hydroxide and hydrogen peroxide according to the reaction:[7].
When sodium hydroxide is used, a hard soap is produced, whilst the use of potassium hydroxide  results in a soft soap.
These include the following: meglumine, sodium  chloride, glycofurfural, glycine,poloxamer, sodium hydroxide solution and water.
It reacts with aqueous sodium hydroxide usually in the presence of a phase transfer catalyst to produce dichlorocarbene, CCl2.
Corrosion resistance:Resistant to 50% sodium hydroxide, 38%concentrated hydrochloric acid, 50% resistance to sulfuric acid.
Sodium hydroxide is very easy to dissolve in water, Inorganic Compound the solubility increases with the increase of temperature, can release a lot of heat when dissolving.
Dimethylformamide is reactive toward strong bases such as sodium hydroxide or strong acids such as hydrochloric acid or sulfuric acid and is hydrolyzed back into formic acid and dimethylamine, especially at elevated temperatures.
While sodium hydroxide hard soap and potassium hydroxide  soft soap are used for everyday cleaning, there are also special soaps produced using other metal hydroxides. .