Приклади вживання To reduce fuel consumption Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
How to reduce fuel consumption in a car?
In all, it carries out six different manoeuvres to reduce fuel consumption.
How to reduce fuel consumption? 10 Ways.
Planes do use these currents to reduce fuel consumption.
To reduce fuel consumption(natural gas) in boilers:.
Effective ways to reduce fuel consumption.
Among the upgrades is a new wing design, which, according to the company,must at 4% to reduce fuel consumption.
Ways to reduce fuel consumption and not to be deceived.
Consult unread newest How to reduce fuel consumption? MPG Spam Caps.
When the brakes are applied, the BAS can recover up to 12 kW of power,again helping to reduce fuel consumption.
Because we need to reduce fuel consumption and CO2-emissions worldwide.
For the driver, this is a signal to look for ways to reduce fuel consumption.
Audi says the system helps to reduce fuel consumption by approximately 0.7 L/100km.
Exact exhaust gas recirculation controllers, which allow simultaneously to reduce fuel consumption and emissions.
The project's main task is to reduce fuel consumption by 20%, and reduce carbon dioxide emissions and waste water.
The first variant can be effectivelyused in the automotive complex as a catalyst for combustion to reduce fuel consumption.
An additional electrical installation made it possible to reduce fuel consumption in the urban cycle to 4.3 liters per 100 km.
At the same time, the combination of the upper and lower wings will enable them to increase their climb power and,accordingly, to reduce fuel consumption.
Less energy is needed for air conditioning, which helps to reduce fuel consumption, or to increase the range of electric vehicles.
Development of the concept of stabilization of the parameters of boiling air in boilers with a heatoutput of 1-2 MW of utilities of Ukraine in order to reduce fuel consumption”.
Aerial refueling has also been considered as a means to reduce fuel consumption on long-distance flights greater than 3,000 nautical miles(5,600 km; 3,500 mi).
Automated features allow the operator to simply dial in the desired working speed andthe tractor will then take care of the rest, automatically optimising engine speed to reduce fuel consumption.
This technology combines to reduce fuel consumption and tailpipe emissions, now as low as 50.4mpg(5.6l/100km) and CO2 emissions of 149g/km(NEDC Equivalent).
This mode allows the vehicle to“coast” with the engine switched off so that no emissions are produced,an important factor in the drive's ability to reduce fuel consumption by 0.4 litres per 100 km.
Since the beginning of the 1990s, we have managed to reduce fuel consumption for newly manufactured trucks by one fifth* and we continue to reduce fuel consumption every year.
The challenging problem of increasing the efficiency and environmental compatibility of internal combustion engines can be solved by the use of portable fuel cavitators and fuel activators whose function is to improve the performance of fuel for the ICEs, in order to reduce fuel consumption by up to 30%, increase the environmental friendliness and engine power, using hydrodynamic cavitation and magnetic activators.
Both technologies can be used to reduce fuel consumption by 5-25%, increase the speed of exhaust gases and maintain higher temperatures during engine operation.
Modernization of fuel management systemusing adaptive control algorithms allows to reduce fuel consumption, and hence the cost of the product while maintaining the productivity of the technical process.
Despite the general tendency to reduce fuel consumption in physical terms, it is possible to assume a slight increase in revenues from excise tax on fuel, compared with the previous year.
Thanks to extensive measures like the Start/Stop system and low-rolling-resistance tires,Opel engineers were able to reduce fuel consumption and CO2 emissions to 8.4 l/100 km and 197 g/km respectively(previously: 8.9 l/100 km, 209 g/km CO2).