Примери за използване на Allowed to dry на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Allowed to dry cleaning.
Washed and allowed to dry well.
Between every puncture, the layer is allowed to dry.
Tomatoes are allowed to dry before cooking.
After this, the car must be allowed to dry.
After that is allowed to dry. Plant it after 48 hours.
The finished picture should be allowed to dry.
Hair should be allowed to dry naturally.
If the ceiling is completely wallpapered,it should be allowed to dry a bit.
Then he should be allowed to dry for 20 minutes.
After this, the files are placed vertically in a container and allowed to dry.
Wet the wall should be allowed to dry thoroughly.
Instead, balloon molds are dipped into vats of pigmented latex and allowed to dry.
Sealers are applied and allowed to dry through.
This excrement is collected by the farmers,soaked with hot water and allowed to dry.
He, too, will need to be allowed to dry for 3 minutes.
The fruits are washed, peeled, then left for 2-3 minutes in boiling water and allowed to dry slightly.
Finally the paper is allowed to dry and is then ready for use.
The cut pumpkin is laid out on the table and allowed to dry a little.
After this, the flax is allowed to dry, the seeds are removed, and it is then retted.
Before staining, gluedwallpaper is allowed to dry for a day.
Each layer should be allowed to dry completely before applying the next one.
The suppository is not administered immediately, but is allowed to dry for 5 minutes.
The gel should be allowed to dry for approximately 10 minutes, before a light-tight dressing is placed over the treatment site.
The area is then allowed to dry.
The gel must be allowed to dry on the skin before dressing and must be applied at least 6 hours before showering or swimming.
The finish needs to be allowed to dry overnight.
Then the paint with about 25cm distance sprayed on the repaired enamel- several times in thin layers until the desired coverage is achieved- and allowed to dry well.
After that, pour concrete solution and allowed to dry at 1-1.5 months.
This type of feed is produced by grinding constituent ingredients which can be turned into pellets and allowed to dry before packaging.