Примери за използване на Barrier layer на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The skin acts as the body's barrier layer.
The barrier layer can be painted with a painter's brush.
Installation of the second vapor barrier layer.
Of course, the barrier layer gets smoother with a paint roller.
They protect the skin,forming a natural barrier layer.
PBL- film with plastic barrier layer is combination of(outside to inside direction).
In addition, further can comprise a vapor barrier layer.
ABL- film with aluminum barrier layer is a combination of(outside to inside direction).
After a thorough drying, a primer is added to the barrier layer.
Food safety is ensured by a barrier layer between the sensor film and the product itself.
Installation of the rafter system.Installation of vapor barrier layer.
The standard demands that the barrier layer must not be exposed anywhere after 100,000 cycles.
In bathrooms, ie rooms with a usually high humidity,it may also be useful to apply an additional barrier layer.
Next, you can proceed to install a vapor barrier layer, the best option is a foil film.
The vapor barrier layer is attached to the surface of the insulation with the help of construction tape.
Kanka: An over-the-counter product that provides a barrier layer to mouth sores, giving temporary pain relief.
Single-dose laminate tubes with inner layer of High Density Polyethylene(HDPE) and aluminium as the barrier layer.
These components create a thermal barrier layer on the skin surface, which prevents heat removal.
First, a barrier layer is applied to the clean, grease-free floor, which is particularly important in the bathroom, so that the high moisture load does not detach the paint from the floor tiles.
Derived from plants, Squalane can integrate well into the barrier layer and thus supports the protective function of the skin.
The barrier layer or color layer can be widely used in display, decorative layer, solar battery package, notebook computer(PV) barrier layer of the cell, and has good market prospects and economic benefits.
HFG 3-5 is designed for welding of laminate tubes, made of ABL(aluminium barrier layer) and PBL(plastic barrier layer) foil.
Mandatory and laying a vapor barrier layer, as it will cause a lack of moisture and insulation, as a consequence, its weighting.
Corrosion inhibitive or passivating pigments promote the formation of a barrier layer over anodic areas, thus passivating the surface.
Therefore, the thickness of the barrier layer is required to be less than 50 nm, and the adhesion property to copper and a dielectric material is good.
Our factory is equipped with complete production cycle for manufacturing of ABL(Aluminum Barrier Layer) and PBL(Polymer Barrier Layer) laminated tubes.
Second is that outer EVOH oxygen barrier layer coating and adhesive layer, produced by co-extrusion die head with two extruders.
The packs are designed in such a way,that the end user is able to separate the cardboard backing from the plastic barrier layer and then put it into the paper recycling.
With the development of semiconductor technology in the 1950s, barrier layer capacitors, or IEC class 3/EIA class IV capacitors, were developed using doped ferroelectric ceramics.
Unlike conventional moisturizers, which create a lipid film on the skin's surface that prevents evaporation of moisture, physiogel cream does not imitate saturation of the skin with moisture before the first washing, butrestores its natural barrier layer, protecting it from dehydration or dehydration.