Примери за използване на Base plate на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Calculation of the base plate.
Base plate size 640 x 485 mm.
Electrical Galvanized base plate.
The base plate of steel culvert pipe.
Supplied on steel base plate ready to mount.
Free online service.Calculation of the base plate.
Although a base plate technically difficult to implement.
Make sure that it has a good solid base plate and a smooth finish.
And that base plate have UEFI BIOS! You rushed a little.
Some craftsmen weld on the base plate and the water tank.
This base plate is made of three sheets of thick plywood, PCB.
The Duckie is fixed firmly onto a base plate with some serious glue.
The thyristor is used as a substrate of silicon element(Base plate).
Place sundial on the base plate and glue everything together.
Maximum height measured from top of the camera base plate: 150 mm.
The“X” port on the base plate must be plugged if internal pilot.
A bottle of holy water-original that work wonders on the base plate.
The“Y” port on the base plate must be plugged if internal drain.
We fasten the short shelf of the bracket and the base plate with a bolt and nut.
The base plate is made of a double layer of plastic material with internal blades.
The control unit of the switch is magnetic andcan be removed from the base plate.
The material of impeller and base plate are FCD45.(Hardness treatment: 58).
Next, the water supply and drainage pipes are laid,which are cast later in the base plate.
The smaller the size of the base plate, the greater the power of vibration.
Now if you found cheaper promotion DDRAM DDRAM 4 3 that if you take them ala DDRAM 4 support base plate.
Hello Cristi, base plate that you presented in a tutorial has integrated video card.
Half done, now you should have a sturdy frame with base plate and upturned pegs in front of you!
Racks with a base plate and a proper faucet mounted at handle height are much more practical.
You can also use a spatula to grasp under the base plate and lightly hit the spatula with the hammer.
The wearing layer and the base plate are subject to chemical and metallurgical bond, with high bonding strength;