Примери за използване на Carbon content на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
They don't have any carbon content.
Carbon content- no less than 20%.
Increase their carbon content.
The carbon content is less than 0.45%.
With increasing carbon content.
Хората също превеждат
The carbon content must be between 0.1 and 1.5%.
Due to its lower carbon content and.
The carbon content in steel generally classifies it.
Natural flakes +80mesh and 90% carbon content.
Biobased carbon content varies from 10% up to 40%.
Natural flake graphite with +80mesh and 94% carbon content.
The material has low carbon content and good weldability.
Cold laminated metal side panels with low carbon content.
High carbon content, compressive strength and hardness.
The figure may not be present at a carbon content of about 1%.
The higher the carbon content, the harder the knife is.
It is made of cold rolled steel with low carbon content.
A carbon content for each product subject to emissions trading.
As addition of copper andextremely low carbon content.
Its carbon content of at least 0.40% gives excellent cutting edge.
S is a variant of 309 stainless steel with low carbon content.
Depending on the carbon content, the martensitic phase takes different forms.
Increasing the carbon content in steel will increase the strength of the steel.
High combustion efficiency,easy to burn out, residual carbon content.
High carbon steel pipe, carbon content is greater than 0.60%.
In a generic sense, steel is classified in relation to its carbon content.
Due to low carbon content, 316L is more resistant to corrode.
I is the steel to continue to reduce the carbon content based on 316.
The higher the carbon content, the higher the strength, hardness and wear resistance.