Примери за използване на Final drying на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
After the final drying, wash off the composition.
Finally, pears are sent to the oven for final drying.
After the final drying of the varnish stencil is removed.
Application of subsequent layers after the final drying of the starting layer.
For the final drying of the 3D epoxy flooring, it takes 1 week.
The finishing coat is applied 2 days after the final drying of the base layer.
After the final drying, simply painted in the right colors.
Freeze drying parameter can be changed during freeze dryer running, and records final drying data.
Proceed with final drying making the hairstyle you want.
Laying of parquet(strips or boards)is made on a primed work base after the final drying of the primer coat.
The final drying of the concrete base takes about three weeks.
Operate the system only after the final drying of concrete, that is not earlier than 3-4 weeks.
The primer is applied by roller, in troubled and difficult places- a brush andleave for 2-3 hours before the final drying.
After the final drying, it becomes one with the restored surface.
A feature of the base layer is the possibility of applying a layer of up to 80 mm thick anda significant strength after the final drying.
After the final drying of the concrete layer, the membrane is placed from the geotextile.
Glue glass pane applying glue on thesurface to be glued, and the painting is done after the final drying of the wallpaper.
After the final drying, the shield is strung from both sides and prepared for facing work.
In addition, the cleaning tanks, pumps, heaters, filters and oil-skimmers,air-wipes for the final drying are installed in the system, too.
After the final drying of silicon remove the pressing subject- the sink is ready for use.
After 15-20 minutes,the surface of the tiles can be cleaned from the remnants of the Fugue with a clean cloth, but for the final drying must be at least a day.
Grout the joints after the final drying of the solution under the tile(an average of 24 hours).
After the final drying of the primer layer, the adhesive solution for the expanded polystyrene boards is prepared.
After the final drying of the putty layer, grouting or sanding of the surface is performed.
After the final drying of the fur, it can be gently combed to give splendor and volume.
After the final drying of the mortar, it is removed, and the seam is protected using a sealant.
After the final drying of the place of the recessed fixture we decorate with putty on wood.
After the final drying of all layers, the last face layer is moistened and begins to perform painting.
After the final drying of the gypsum(gypsum starts to lighten), you can extract the model from the mold.
After the final drying of the concrete layer(which is 3 weeks), the formwork is removed and the walls are lined.