Примери за използване на Frame should на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The frame should be based on your own style.
This means that the shape of the frame should directly contrast your face shape.
The frame should ideally include the following properties.
Through each meter of the length of the frame should provide cross jumpers from the corner.
In one frame should be at least 2.5 kg of quality product.
When shopping for sunglasses,keep in mind that the frame should fit comfortably on your face.
The frame should be wider than the widest part of the face.
If possible, the pattern in the corners of the frame should be well chosen- so it will be much more beautiful.
The frame should be convenient and not cause fatigue even after long use.
Accordingly, the frame should be 30x20 centimeters.
The frame should be moved with your thumb, and after reaching the desired step between the jaws that mate with the measured base, it is fixed by means of a clip.
Height of the frame should be at least 78 mm.
The frame should be made of strong plastic or metal, and the ears, nose and temples should be comfortable when worn.
A table top and frame should be made of 18 mm chipboard.
The frame should be sized to butt against the block on either side, and should have a jamb depth equal to the wall thickness.
The shape of the frame should contrast with the shape of the face.
How much frame should be prepared ahead is govern by this setting.
For optimal convenience, the frame should be collected on the ground, and then the long bolts to fasten the structure.
The tree for the frame should ideally be absolutely dry and free from defects, the insulation should be of high quality and well closed from the ingress of water.
Again taking the average height for women,small frame should be 111 to 124 pounds, medium frame: 121 to 135 pounds, and a large frame: 131 to 147 pounds.
Important: caulk frame should be in strict sequence: first hammered outer gap around the perimeter of the lower crown, then go inside the house and is doing similar work.
The lower part of the frame should be deepened by 10-20 cm in relation to the front overhang of the table top.
Undoubtedly, the metal frame should bestrong enough to withstand not only its own weight but also the weight of sheets of drywall finishing material of the future and the possible external components, such as hours or paintings.
The base of the frame should be able to ensure maximum stability of the press structure.
The mirror in the frame should fit into the existing interior and echo the color dominant of the room.
First of all, the frame should be in harmony with the photo, and then with the general style of the interior.
Frames should be covered with a crispy golden brown. Then cool.
Frames should be broader than the widest part of the face.
Your frames should be as wide as the widest part of your face.
These frames should be available by the end of 2013.