Примери за използване на Head height на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
No balls over head height.
Head height with bur(19 mm).
Sanding head height: mm 15.
Head height: approx. 12 cm.
Delivery should be head height.
Low head height, only 74 mm.
Ideal for sawing above head height.
Cylindrical head height C max. 0.35 mm.
Head height(up to the top of the hair): 487pixel;
Both machines have easy head height adjustments up to 15cm.
Head height(up to the crown of the head): 33mm;
Image definition parameters Head height(up to the top of the hair): 34.7mm;
Head heights can vary as long as the remainder of the body remains proportional.
Equiped with sensors to automatically adjust head height and reduce print head strikes.
Capping head height is adjustable through a screw hand wheel.
Usually such hair is done on a hairstyle with the uneven fragmentary ends which go steps on head height.
Adjustable print head height to adapt more different media.
This means that frequent volume flow calculations in large rooms and measurements above head height can also be carried out reliably and comfortably.
Reduced head height and deep bowl to further reduce weight without compromising strength.
The movement: From this slightly forward leaning position,open the arms upwards until the hands are at about head height(photo), pulling the shoulders backwards.
A head diameter of only 9 mm and an overall head height of 17.2 mm with a 16 mm bur attached make working in small children's mouths simple and comfortable.
Since a garden hose is already present in most gardens, it is sufficient to mount a shower head with a stopcock on it andplace it on a hook in the garden Mount head height.
It is a VectorWorks Plug-In Object which draws the beam oval at head height, and it can also show the same beam at floor height and in 3D. Beam Draw PAR draws an….
Your head height, measured from the top of your head, including the hair, to the bottom of your chin, must be between 50% and 70% of the photo's total height. .
The cardboard does not have to completely encase the balloon(there will later be the viewing window and visor) andthe height of the cardboard varies with the length of the neck and head height of the child.
The head height or facial region size(measured from the top of the head, including the hair, to the bottom of the chin) must be between 50 percent and 69 percent of the image's total height. .
They collected measurements twice a day, in the morning and afternoon,on 32 days, measuring pollution levels both inside a pram and at adult head height to examine differences in exposure for babies and parents.
With a diameter of only 9 millimetres and a head height of 17.2 millimetres with a 16 millimetre bur mounted, the turbine of the Synea Vision range enables the dentist to treat the patient with minimum restriction and perfect control in every case.
The SW-PLC2 Setworks is based on a programmable logic controller(PLC),a magnetostrictive measuring strip(which reads current saw head heights), a programmable control panel and a rotational speed controller used in asynchronous motors.
The head height or facial region size(measured from the top of the head, including the hair, to the bottom of the chin) must be between 50 percent and 69 percent of the image's total height. The eye height(measured from the bottom of the image to the level of the eyes) should be between 56 percent and 69 percent of the image's height. .