Примери за използване на Individual layers на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Use transition effects for individual layers.
The individual layers are glued together crosswise.
Long, thin vessel to press the individual layers firmly.
The individual layers become thinner and more translucent.
Long, thin vessel(to firmly press the individual layers).
So you can apply the individual layers even finer and thinner.
Individual layers of these games make up games for girls updo format of"Beauty.".
However, air circulation between the individual layers must be flowing.
The individual layers are then placed in a scale like one behind the other.
The ordered arrangement of the individual layers of the epidermis is lost.
Check the drying times that the manufacturer specifies between the individual layers.
Step 4: Now glue the individual layers together with small blots of glue.
To do this,pull on the upper tips to release the individual layers from each other.
The individual layers in the laminate floor can separate if the humidity is too high.
Adjust and grade colors on individual layers or adjustment layers. .
These individual layers will then be compacted down with a straw cover placed on top of each one.
The glass is multi-layered as the individual layers are connected with special bindings.
It has a format for saving unfinished images with the possibility of further work on individual layers.
This audio can then be exported as a whole or as individual layers of instruments(known as“stems”).
The Israelis found the Obama birth certificate PDF could be ungrouped,revealing individual layers.
Soft and non-resistant finishing layer- individual layers were applied too quickly one after the other.
Cooling: If you printing continuously using the 100% cooling setting, it is possible that the individual layers may separate.
To create the 3D replica of the Matterhorn, for example, 120 individual layers of material were successively removed from the molecular glass substrate.
Cooling: If you printing continuously using the 100% cooling setting,it is possible that the individual layers may separate.
However individual layers can also vary in thickness to give different finished panel thicknesses(typically, a 15 cmlayer will produce a 15 mm panel thickness).
The clad metal products could be up to four individual layers of metal or alloys.
The principle of the interaction of the elements associated with different temperature coefficients of thermal expansion of the individual layers.
In normal weather conditions, the drying time between individual layers should be 4 to 6 hours.
This number describes to what extent the construction material prevents the passage(diffusion) of water vapor through it andit is necessary to assess the individual layers in building structures.
In order to carry out a calculation of lenght orcross sectional areas obtained from individual layers in composite plans, an additional amount of EUR 3.60 BGN per lenght or section will be payable.