Примери за използване на Overcurrent на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Overcurrent Protector Extension Cord.
With over-voltage, overcurrent and other functions.
Overcurrent protection- output 20 A fuse;
B= Lubrication cycle time interval;C= Overcurrent.
Phase loss, overcurrent, three phase imbalance.
Хората също превеждат
Precisely time lubrication and alarm for motor overcurrent.
Combining any overcurrent between breaking working current and short circuit current;
Its function is to introduce an overcurrent into the ground.
We supply Overcurrent Protector Extension Cord of high quality with UL, cUL approvals.
Protection function: Overheat protection(short circuit, overcurrent).
The cause of damage is overcurrent resulting from the diode breakdown, not the voltage itself.
Smart protection against overheating,overvoltage and overcurrent.
Overvoltage and overcurrent protection values can be set according to user needs.
Professional PCB prevent short circuit, overcurrent and overvoltage.
There used to be a time when overcurrent protection for household circuits was primarily provided by fuses.
Power transformer partial discharge detection m… What is overcurrent protection?
It has protection against overheating, overcurrent and high voltage and cooling with a fan, a number of additional functions.
Discuss the relative advantages and disadvantages of these two overcurrent protection technologies.
In that case it is not necessary to provide overcurrent protection for the neutral conductor or a disconnecting device for that conductor.
It will not cause maloperation and automatically switch off in over voltage and overcurrent case.
The device has protection functions such as overvoltage, overcurrent, zero start, system detuning(flashing), etc.
The device tripping ouzo- this additional protective means,do not replace fuses with protection against overcurrent.
Zero-sequence III: Zero-sequence overcurrent protection to protect the backup of the full length of the line and the next line.
The power supply should be done by a special machine,which set overcurrent and thermal protection;
Overcurrent protection is a form of protection that protects the device when the current exceeds a predetermined maximum.
The pump has the function of detecting such faults as disconnection, overcurrent, overload, and earthing.
Generally speaking, distribution panel overcurrent protection devices are rated in such a way as to protect the wiring, not the load devices.
The boiler power supply system must be configured with a special automatic overcurrent and thermal protection;
Where in the circuit would it be best to install an overcurrent protection device for protecting the computer from burning itself up in the event of an internal failure?
The machine is easy to operate andequipped with protective devices for overcurrent, overvoltage and output overload.