Примери за използване на Overcurrent protection на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
What is overcurrent protection?
Power transformer partial discharge detection m… What is overcurrent protection?
Why overcurrent protection works.
However, power supplies often have overcurrent protection built-in.
Overcurrent protection- output 20 A fuse;
MOP: Maximum overcurrent protection.
Overcurrent protection can handle different types of faults in segments and in different situations.
Discuss the relative advantages and disadvantages of these two overcurrent protection technologies.
Circuit breakers for overcurrent protection for household and similar installations- BDS EN 60898-1.
The cause of the fault:the test product discharges or strikes through the pressure or overcurrent protection action;
Overvoltage and overcurrent protection values can be set according to user needs.
If using such a wire is connected to the heated bath of running water,the connection should be done through automatic overcurrent protection.
There used to be a time when overcurrent protection for household circuits was primarily provided by fuses.
Directional current protection: that is,a power direction discriminating component is added on the basis of the overcurrent protection.
In the example overcurrent protection(50/51) is provided at both sides as back-up protection. .
Discuss this with your students, and try to think of applications where such an overcurrent protection device would not be appropriate.
Zero-sequence III: Zero-sequence overcurrent protection to protect the backup of the full length of the line and the next line.
Reliable quality: circuit power supply all use high-quality components,each LED has a separate overcurrent protection, no need to worry about damage.
In that case it is not necessary to provide overcurrent protection for the neutral conductor or a disconnecting device for that conductor.
Overcurrent protection is a form of protection that protects the device when the current exceeds a predetermined maximum.
Therefore, most power supplies should have current limiting(overcurrent protection) that activates if the output current exceeds a specified maximum.
Overcurrent protection devices will, of course, either“blow” or“trip” under such conditions, but their interruption ratings have nothing to do with the current at which they open.
Where in the circuit would it be best to install an overcurrent protection device for protecting the computer from burning itself up in the event of an internal failure?
(12) Reliable quality: All circuit power supplies use high-quality components, andeach LED has a separate overcurrent protection, so there is no need to worry about damage.
Generally speaking, distribution panel overcurrent protection devices are rated in such a way as to protect the wiring, not the load devices.
Electric box HS-ECB08 automatically controls lubrication equipment and lubrication pump to replace the man operation and saving maintenance cost, this electrical panel controller is used for the electric motor with power below 1.5kW,there are alarm single for overcurrent protection.
When selecting switchboards and overcurrent protection devices, it is important to know both the maximum continuous current required and the available fault current.
This set of test system consists of a test console, an inflatable no partial high voltage test transformer, a coupling capacitor and protection resistor, a set of isolation filter,the whole system has complete overvoltage, overcurrent protection and reliable, With the characteristics of small interference.
An overcurrent protection switch is provided at each stage to selectively cut off a part of the line according to the current magnitude, location, duration, and the like.
D-RCD device, unlike RCD deactivatesseparate power station in case of overload(TK- overcurrent protection) or a short circuit, that is, an overcurrent( overcurrent protection- overcurrent). .