Примери за използване на Switching devices на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Designed for use in switching devices.
Safety switching devices for limiting the pressure.
Designed for use in switching devices.
Direct operation with switching devices that combine driver and GaN FETs is further enhanced with logic-level gate signals and enable outputs.
Detectors are combined with switching devices.
Circuit breakers(protective switching devices), established with the TN-C system, protecting email.
The main advantage of PWM is that power loss in the switching devices is very low.
After all, the nominal currents of these switching devices are often forgotten when buying, which leads to their rapid failure, and even fire.
Germanium transistors P 214 V PNP 10W 5A 55V Designed for use in switching devices.
Refrigerating systems andheat pumps- Safety switching devices for limiting the pressure- Requirements and tests.
In order to understand this question,we consider the design and purpose of switching devices.
The software product supports a large number of models of video cameras and switching devices D-Link, can interact with sensors of position, smoke and the opening and closing of doors.
Installation and installation of a three-phase meter is preferable to produce in a special cabinet,where additional protection and switching devices are installed.
Suitable for switching devices, disconnectors, disconnectors and fuse combinations in the distribution circuit and in the motor circuit if the rated voltage does not exceed 1000 V or does not exceed 1500 V DC.
The Schmersal Group therefore is one of the largest supplier of safety switching devices in the world.
Cree's product series includes SiC materials, power switching devices and radio frequency devices, with the aim of electric vehicles, fast charging, inverters, power supply, telecommunications and mil/aero.
With the group control function you get automatic control of all blinds at once because you can set the exact action time(raise/ lower) on these switching devices.
According to the requirements of the new power Preventive testing procedures, conductive loop resistance testing of various switching devices is must be measured, whose testing current can not be less than 100A, Continuous Current time shall not be less than one minute.
In the slightest degree it will become clear to a person who understands electrical engineering that it is impossible to remove an outlet from a switch without changing the electrical installation of these switching devices.
A MICRO-OHMMETER According to the requirements of the new power Preventive testing procedures, conductive loop resistance testing of various switching devices is must be measured, whose testing current can not be less than 100A.
Electrical switchgear' means switching devices and their combination with associated control, measuring, protective and regulating equipment, and assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures, intended for usage in connection with the generation, transmission, distribution and conversion of electric energy;
For the purposes of this Regulation‘high voltage switchgear' means switching devices and their combination with associated control, measuring, protective and regulating equipment, and assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures, intended for use in connection with generation, transmission, distribution and conversion of electric energy at rated voltages above 1 000 V.
Next: TXGNH-12 Box-type fixed metal-enclosed switching device high voltage switching device.
The RCD is a switching device.
Previous: TXGN66-12(Z) Fixed enclosed switching device high voltage switching device.
Could it be better for each switching device to work independently?
A switching device only for roller blinds, garage doors or gates RFJA-32B solves numerous issues.
Remember, this switching device always works only on phase break, it does not need zero.
Thanks to its compact design, the switching device is easily installed to the blind drive unit or garage door operator on the external control terminal.
For this purpose, a switching device can be used in combination with a light tunnel dampening flap.