Примери за използване на The heat transfer на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
This will slow the heat transfer.
Make sure the heat transfer to the air in different directions.
This will allow to reduce the heat transfer.
Make sure the heat transfer to the air in different directions.
Insulation(ability to reduce the heat transfer).
Хората също превеждат
The heat transfer rate is up to more than 90%, saving energy and electricity.
Construction of pipelines of the heat transfer network;
To increase the heat transfer in the furnace under the slope, there are 2-3 pipes.
Energy saving by reducing the heat transfer rate.
Scale, corrosion and biofouling affect the heat transfer negative.
Scale, corrosion and biofouling negatively affect the heat transfer.
Of course, it is good to note that the heat transfer is not an instantaneous process.
It is used, for example,in the thermos in order to reduce the heat transfer.
Heavier aluminum tape can defuse the heat transfer through the tape and act as an insulator.
This design is somewhat similar to the battery and increases the heat transfer area.
This will facilitate the heat transfer, and consequently, the heat regulation of the baby's body.
Print the front of the picture on the heat transfer paper.
Since the heat transfer coefficient of the plate heat exchanger is 2.5 to 8 times higher than that of the tube type.
The heat transfer through the outer walls of the houses is 0,18 W/m2 at a norm as per the European standard of< 0,20 W/m2.
In this case the ribs and the pipe must not be minimum clearance,otherwise the heat transfer is greatly reduced.
Non-fouling also reduces thermal resistance, resulting in a significant increase in the heat transfer performance of titanium.
It increases the heat transfer and increases the threshold of excitability of the centers(thalamic) pain sensitivity.
With our DFI technology,where controlled oxyfuel flames are fired directly onto the moving metal, the heat transfer is drastically improved.
Solar collectors are safely protected from frost if the heat transfer from the hot water storage tank to the solar collectors is reversed.
If the heat transfer is too slow,the flux concentration may remain high and result in cold solder joints, voids and incomplete reflow.
Shell-and-tube heat exchanger is composed of many tubes which constitute a tube bundle that serves as the heat transfer surface of heat exchanger.