Примери коришћења Masking tape на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
Thermal Spray Masking Tape.
A hammer, masking tape, three C batteries and a tampon.
You can use either craft glue or masking tape.
High temperature masking tape for car painting.
Masking tape, if you are not processing the product entirely;
Crepe paper tape jumbo roll for masking tape.
With masking tape you stabilize the towers additionally.
To avoid joints between the plaster,use masking tape.
Step 23: Glue the masking tape at the bottom of the witch's hat.
Lay the tile in front of you andpick up the pencil or masking tape.
Another option is to use masking tape attached to newspaper.
The masking tape glued all the places that will not need to be painted.
Once again, if you can,put the masking tape under the skirting board.
Silhouettes of decorative elements should be on a path to glue masking tape.
DEMI Wholesale masking tape washi tape foil pla….
If you want to get a clear distinction between the layers,then apply masking tape.
High temperature masking tape for car paintingContact Now.
To eliminate issues like these,label each component's wire clearly using masking tape.
Thus, what would be called“Scotch” Masking Tape was born in 1925.
Once again use masking tape if you cannot see your marking out clearly.
His best treatment for cellulite in Miami equipment is outdated old and has masking tape on it;
Polyethylene can be fixed with masking tape or any other method.
This masking tape was also the first in their“Scotch” brand line of pressure sensitive tapes. .
I wrapped my fingers with tissue and masking tape and covered them with my thin gloves.
Using masking tape helps a lot to control the drill, which can easily slide off the smooth surface of the glaze.
A more modern option is to use masking tape or special window tape. .
In order to paint the Raptor with a roller or sprayer,do not touch the unwanted areas, a masking tape is used.
Tip: Make sure you stick the masking tape as cleanly as possible and without wrinkles.
To prevent possible chipping of the glaze,you can glue a small piece of masking tape to the drilling site.
Materials: Water, masking tape, marker, a ruler, a nail, scissors and a capped soda water bottle along with a helper can help complete the project to understand underwater pressure.