英語 での Continuous current の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Maximum continuous current 8A.
The LED will turn on with a 1.5A continuous current.
Rated continuous current 1A.
The heavy-duty ratings are the typical motor power and continuous current ratings in heavy-duty use.
Continuous Current 150A 10min.
Max Charge Continuous Current:.
Continuous current range 1 A- 400 A.
The whole soul pours in a continuous current to God;
Max continuous current: 800mA.
Where PFC is concerned,the approaches to loss reduction are somewhat different for continuous current mode(CCM) and for boundary current mode BCM.
Continuous current or intermittent current? .
Discharge and charge Continuous Current(60min): 120A.
Continuous Current(A): depends on voltage and power.
The maximum allowable continuous current passing through thermistor at 25℃.
Continuous current sense UI interface click sound effects.
ST power factorcorrection controllers operate in transition mode(TM) and continuous current mode(CCM), and are suitable for a wide-range-mains operation.
Continuous Current(A): 0.5A of 15nm torque dc gear motor encoder.
As a result, compared to shunt resistors and similar products of other companies, heat generation when applying the current can be greatly suppressed,and 50Arms continuous current is achieved.
The continuous current limit feature offers control of inrushcurrent at startup while charging high capacitances at the output side.
The device contains an N-channel MOSFET that can operate over an input voltage range of 0.8 V to 5.7 V andcan support a maximum continuous current of 6 A. The switch is controlled by an on and off input(ON).
For NiMH cells, a safe continuous current is usually around C/50, but trickle charging for NiMH cells is not universally recommended.
Depending on the manufacturers and on the total number of such nodes, all these separate small quiescent currents can sum to several milliamps,or perhaps as much as 100mA of continuous current from the battery.
The MAX13253 operates with up to 1A of continuous current and features integrated protection including fault detection, overcurrent protection, and thermal shutdown.
PowerCommand automatic transfer switches are based on microprocessor control technology, optimizing performance and ease-of-operation. Their robust, high-contact-force design withstands thousands of switching cycles without burning orpitting to provide 100 percent continuous current ratings.
Based on the proven technology of TE's EVC 250 contactor,the new contactor features a continuous current of 175A and a short circuit capability of 5kA, meeting medium power performance requirements.
In addition, for low AC line input operation,CCM(continuous current mode) operation have been implemented to achieve lower conduction losses thereby achieving a higher efficiency to meet international regulatory standards.
The device contains an N-channel MOSFET that can operate over an input voltage range of 1 V to 5.5 V andcan support a maximum continuous current of 2 A. The switch is controlled by an on and off input, which is capable of interfacing directly with low-voltage control signals.
The EVC 80 contactor features a continuous current of up to 80A and a voltage rating of up to 450V, making it suitable as the main contactor in lower current applications and the pre-charge or auxiliary in higher-power batteries.