英語 での Noise is low の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The fan noise is low.
Ripple rejection is 75dB and noise is low.
Noise is low, and the circuit is more stable.
Overall machine noise is low.
And the noise is low due to the gear is hardened.
With hydraulic system, noise is low.
The noise is low and the pressure is adjusted automatically and proportionally.
Therefore, the fuels are sufficiently burnt and the noise is low.
The structure is reasonable, the noise is low, the temperature rise is low. .
It is very small without vibration bowl and noise is lower.
The appearance is clean and generous, the noise is low during operation, and the dust removal effect is good.
The main engine is WP0155 reducer,this reducer runs smoothly and the noise is low. 7.
With its excellent signal fidelity, background noise is lower than similar products in the industry.
The main body adopts open drive and gearbox combination,the transmission efficiency is high, the noise is low.
Damped gears are used for bottle conveying, the noise is low and the whole machine runs smoothly.
(2)When burning, the noise is low, pollution-free, flue gas is burned completely, which can save fuel cost and improve economic efficiency.
The performance of the gearbox motor is stable, and the noise is low and the reliability is high.
Systems bags system uses step machine subdivides the technology, the automatic tracking, locates the sack the color code, with ease completes the system bag the operation, the adjustment, the speed quickly,the movement steady, the noise is low.
Pneumatic valve anddamped gears are used for bottle conveying, the noise is low and the whole machine runs smoothly.
Automatic switching to fast response mode under IOUT<8mA conditions or to low power mode under IOUT<1mA conditions. In low power mode, supply current is as low as 1.5μA. In fast response mode,ripple rejection is 70dB and noise is low.
Pneumatic value anddamped gears are used for bottle conveying, the noise is low and the whole machine runs smoothly.
Compared with the traditional fixed pump andvariable pump system, the noise is low, and the noise is reduced by 1/10 in normal conditions, which is more suitable for the sealed dust-free workshop.
The meshing of the bevel gear of the orthogonal axis gear motor is generally smaller than 2 teeth, while the hypoid gear is with the meshing bigger than 2.5 teeth,and the operating noise is lower than that of the bevel gear.
The electromagnetic design is optimized, the electromagnetic noise is low, the operation is stable, and the efficiency is high.
Has the efficiency to be high, the performance range is broad,the movement safe steady, the noise is low, the life is long, characteristics and so on.
Engine noise was low.
Air consumption and noise are low.
The Original MOSFET had a comparatively fast switching speed, and so an RG of 100 Ω was reasonable as a means to counter noise; but by using the low-noise R6004END and setting RG to 50 Ω,even at fast switching speeds, noise was lower than in the Original circuit, so that noise could be reduced simultaneously with an improvement in efficiency.
Therefore, the steam consumption and noise are low.
As dust and noise are low, the plastic cable carrier is suitable for clean rooms for semiconductor.