英語 での Physical interface の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Video input physical interface.
Physical interface: 2x10 double needle, 2.0mm pitch.
Audio input physical interface.
The IPv6 loopback address cannot be assigned to a physical interface.
Can you talk about the physical interface of the 3Doodler?
The IPv6 loopback address cannot be assigned to a physical interface.
Physical Interface Micro USB+Charging cradle interface, 3.5mm audio.
It may never be assigned to any physical interface.
Only the physical interface is specified; no materials requirements or micro-contamination limits are given.
At that time, you need to make the physical interface to have been down.
The lla value is either a colon-separated MAC address orthe name of a physical interface.
This is the same for both when the physical interface is disabled and when it is enabled.
For DHCPv6, the interface name is the name of the physical interface.
Also, rewrite the MAC address of the physical interface, which was randomly decided, to an easy-to-understand value beforehand.
Receive physical interface mode should be configured with the same value as transmit physical interface mode.
Then, assume that flow entry that uses each physical interface has been registered for three entries.
It consists of a main board equipped with an abundance of high-speed FPGA transceivers anda sub-board with a physical interface.
XRY PinPoint uses the familiar andeasy to use XRY Logical/Physical interface, but requires a separate license.
Although this slew-rate limit makes the physical interface simpler, it also effectively limits the maximum data rate that can reasonably be used.
The bridge interface configurationfile now has the IP address and the physical interface has only a MAC address.
RS-232 is a long-established standard that describes the physical interface and protocol for low-speed serial data communication between devices.
If the link-local interface is unplumbed,then all addresses configured by DHCP on that physical interface will be removed.
RS-232 is a long-established standard that describes the physical interface and protocol for low-speed serial data communication between devices.
XRY PinPoint is fully integrated and uses the familiar andeasy-to-use XRY Logical/Physical interface, but requires a separate license.
RS-232 RS-232 is a long-established standard that describes the physical interface and protocol for low-speed serial data communication between devices.
Additionally there is a CAN controller that also provides isolated physical interface that is widely used in automotive applications.
The FlexRayTM transceiver is a Bus Driver(BD) and it accomplishes the physical interface between the Communication Controller and the Bus medium.
Use of the S2C 4-LanePCIe Gen2 GTX Module to implement Physical interface transform between the PCIe interface and the Samtec GTX interface. .