英語 での Rms の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Lab rms products.
Rated current is 20A rms.
Richard Stallman(rms) is coming to London to give a talk on July 4th.
Voltage rating: 125 vac rms.
What does this mean for RMs and others in corporate and institutional banking?
In text, use lower case: rms.
The ADAU1401 has an rms signal detection function, which can be used to determine whether or not there is an input signal.
That will tell you the rms value.
This is the simplest true rms measurement technique in theory; yet in practice it is difficult and expensive to implement.
The compact products can withstandhigh vibration amplitudes of up to 10g rms.
PARD is expressed in mV peak-to-peak or rms, at a specified bandwidth.
Since the digital filter has an equivalent noise bandwidth of only 50 Hz,the output noise is 881 nV rms.
Use of the probe on uninsulated conductorsis limited to 600 V ac rms or dc and frequencies below 1 kHz.
Find out what top performing RMs know about CIB customer ecosystems and 3 critical insights that cannot be ignored!
As a result,many practical power measurement circuits rely on measuring rms voltage.
The current consumption, range of output data rates, and rms noise can be tailored with the power mode selected.
A 94 dB SPL sinusoidal input signal will give a -26 dBFS peak output level, or a -29 dBFS rms level.
Receiver name, sideband mode, tracking velocity, frequencies, rms noise level, data weight, and data scaling factor.
ADCLK925 rms jitter vs. input slew rate. Two such clock-distribution devices are the ADCLK9542 clock fanout buffer and the ADCLK9143 ultrafast clock buffer.
Thermal detection essentiallyinvolves the practical implementation of the classic definition of rms that we previously looked at.
Low phase noiseLow phase noise of 0.18 degree rms(offset frequency from 2.5kHz to 4MHz) improves signal quality.
The GEN DAQ acts as a"number cruncher" getting raw data in(like voltages and currents),and sending computed results(like rms values, power and efficiencies) to the automation systems.
In addition, the software also calculates the rms value of the point-by-point difference between the Channel A and Channel B voltage waveforms.
The HP4284A with the high power option(option 001) increases the rms source current level from 10 mArms to 100 mArms.
For a sinusoidal input, the rms level is 3 dB the logarithmic measure of(FS√2) below the peak level; this difference between rms and peak may be different for more complex signals.
Figure 10 shows the response of the forward power sensing rms detector when the ADL5920 is driven in the forward direction.
The detection range of the ADL5902 rms detector is 65 dB and is extended to 95 dB by the addition of the linear-in-dB AD8368 VGA.
Spurious-free dynamic range(SFDR) is the ratio of the rms full-scale value to the rms value of the largest spurious spectral component.
Therefore, by the basic definition of rms, the value of the dc reference voltage will equal the rms value of the unknown signal voltage.