英語 での The friction coefficient の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
(3) The friction coefficient is small;
Through the sample, based on the force balance principle,to define the friction coefficient of the. .
And the friction coefficient is not more than 0.6.
When these silica particles remain on a smooth surface, the friction coefficient increases on the surface of the coated material.
The friction coefficient and energy consumption is small.
Its main function is to support the mechanical rotator,reduce the friction coefficient during its motion, and ensure its rotation accuracy.
The friction coefficient decreases after the heat pressure process.
Its main function is to support the mechanical rotating body,reduce the friction coefficient during its movement, and ensure its turning accuracy.
The friction coefficient 0.22 is very low thanks to the large quantity of carbon.
With boundary type lubrication, avoiding metal contact is almost impossible,and therefore, the friction coefficient is greater than at fluid lubrication.
At this phase, the friction coefficient is bigger, thus the abrasion pace is very quick.
Stabilization" abrasion phrase: After the"Running-in phase", the friction happens between PTFE and PTFE,thus the friction coefficient is smaller and keeps steady.
The friction coefficient(indicating the level of friction) estimated by Kano is 0.08.
Using mathematical methods, engineers can measure the friction coefficient of the road surface at each individual wheel, as well as the status of each wheel.
The friction coefficient and wear volume resulting from a 1 wt% addition of OLC to oil are shown below.
It uses self-lubricating PTFE and sliding bearing to reduce the friction coefficient to the lowest in conjunction with the high intensity and high fineness stem.
The friction coefficient of the item on the conveyor varies with the material and shape, etc.
The friction coefficient changes when the load slides, but the value is only between 0.05 and 0.15.
When OLC is added to oil, the friction coefficient is reduced by 30%, and wear volume is reduced to one tenth.
But the friction coefficient of ordinary gray cast iron brake shoe is small, and with the increase of friction velocity.
Improve the friction coefficient, more suitable for steep slope and vertical engineering design needs, improve project stability.
The friction coefficient is smaller as the content of PTFE is larger, and excellent self-lubrication is addressed by adding thermal treatment which melts and deforms the PTFE particles(at around 350℃) to further shrink in size.
Compared with the flat wall pipe, the friction coefficient of the direct fiber cable is reduced, and the direct friction coefficient decreases by.
Lowering the friction coefficient makes the screw easier to tighten, however tightening at the same torque could still damage the thread; there's no point in it all if galling and seizing then occur due to outside factors.
It can beconfirmed from the above test results that the reducing the friction coefficient on thread surface by special surface treatment will achieve higher axial force than screws with no surface treatment subject to the same tightening torque.