英語 での Transfer functions の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
(1) typical transfer functions employed for approximation of filter responses.
Cut Index[sample]The starting and ending positions of sample used for generating transfer functions.
Amplitude-distortion transfer functions. Phase distortion works in much the same way.
To read this data,the application must call special-purpose data transfer functions in the Utility ROM.
In deriving the transfer functions for the step-down converter, two steps are required.
We support both the PQ(SMPTE 2084)or HLG(AKA Hybrid Log Gamma or arib std-b67) transfer functions.
As before, the transfer functions to be derived are and,and once again, the transfer functions are derived in two steps.
We sat around talking about Fourier transforms, Bessel functions, modulation transfer functions, stuff like this.
This time we shall derive the transfer functions for a region in which the step-down switch and the step-up switch are both switching.
In even more detail,engineers can mix in individual source strengths and transfer functions, such as from a single engine mount.
LC_CONST DIAGWhen transfer functions are measured properly, it can be set to FULL. In most cases, however, a setting of DIAG is more appropriate.
It includes the classical control theory todesign feedback control systems based on transfer functions and frequency response.
From these two equations, we can derive the transfer functions for both the current mode and the voltage mode of a step-down converter.
Using the concepts introduced in the previous chapter on"The State-Space Averaging Method",we derive transfer functions for various control modes.
PLECS enables the user to determine open-loop transfer functions or closed-loop gains of switching systems without having to revert to averaged models.
Reading from SRAM locations can be performed in the same way that code running in flash reads from flash memorylocations-it uses the Utility ROM data transfer functions moveDP0inc, etc.
Determine change amounts for an external disturbance, and describe the transfer functions A calculation example from equations 5-27 and 5-28 above is shown below.
Upon comparing with the transfer functions for the step-up converter in the previous section, we see that ultimately, characteristic results similar to those for a step-up converter are obtained.
Communication terminals(including integrated cards) with data storage, conversion and transfer functions used in the equipment room managed and maintained by non-communication carriers.
In this"series on transfer functions", we develop a discussion of,among other things, transfer functions for DC/DC converters and approaches to deriving transfer functions. .
Camera Native Workflow A camera native workflowassumes you are using color spaces and transfer functions that are designed by the manufacturer of the project's primary camera.
Whether or not to reset the transfer functions microphone channel selected in“Create sound source coordinate file”. It will reset the channels selected starting from 0.
The coil current does not change over one period 2 The capacitor charge amount does not change over one period Step 2: Determine change amounts for an external disturbance,and describe the transfer functions Calculation examples are shown below.
Comparison of voltage mode andcurrent mode Before deriving the current mode transfer functions, we compare the voltage mode and current mode, including general approaches to these concepts.
Use the Utility ROM data transfer functions(UROM_moveDP0 and similar functions) to read from the RAM and, by writing similar functions in the flash, perform an indirect write to the RAM.
This time, we stray somewhat from derivation of transfer functions for DC/DC converters to explain an analytic solution for subharmonic oscillation, an understanding of which is important.
This time, we will derive the current mode transfer functions, while comparing and contrasting with the voltage mode, and will summarize the voltage-mode and current-mode transfer functions. .
Of course, power supplies, which are the main theme of this website,have transfer functions, and by determining the transfer function as part of power supply design, the response characteristics and stability can be evaluated.
In Figure 3b and 3c, PSFs and optical transfer functions(OTFs) are compared between before and after applying the OSR filter to a confocal fluorescence microscope image with a pinhole size corresponding to the Rayleigh criterion.