The system clocks of all NTP-managed devices are synchronized to the millisecond precision.
Atomic clock system.
XTAL2 may alsobe configured to output a divided version of the system clock.
The accuracy is limited by the accuracy of the system clock.深度睡眠模式停止系统时钟并关闭PLL和Flash存储器。
Deep sleep mode stops the system clock and switches off the PLL and flash memory.Combinations with other parts of speech
Selects source for the system clock:.
All these are clocked by the system clock.
The accuracy is limited by the accuracy of the system clock.
Verify the date and time on the system clock is accurate.
Returns the current date from the system clock.
Make sure the date and time in the system clock are correct.
Directly as a system clock, or used as PLL input.
The accuracy is limited by the accuracy of the system clock.
On OS X,only admin users can change the system clock.Connectify的通知托盘中运行的系统时钟旁边。
Connectify is running in the Notification Tray next to the system clock.
Right-hand corner of your computer screen next to the system clock.Connectify在通知托盘中运行的系统时钟旁边。
Connectify is running in the Notification Tray next to the system clock.
Change to system clock.内部振荡器驱动系统时钟,而定时器2(和/或PCA)的时钟由一个精确的外部.
Internal oscillator drives the system clock while Timer 2(and/or the PCA) is clocked by an external precision oscillator.许多关心信号完整性和系统时钟的工程师都会关注这一关系。
Many engineers concerned with signal integrity and system timing frequently question this relationship.OpenNTPD逐步调整系统时钟,如在64位ArchLinux系统上运行OpenNTPD输出示例所示:.
OpenNTPD gradually adjusts the system clock, as seen here in the output of OpenNTPD running on a Linux system:..
The system clock can be any of the available clock sources including the PLL.微软还改善了系统时钟,可以在日历中添加完整的事件列表。
Microsoft has even improved the system clock in Windows by adding a calendar with a full list of your own events.而当系统时钟达到120MHz时,除非使用高速电路设计知识,否则基于传统方法设计的PCB将无法工作。
And when the system clock reaches 120MHz, PCBs based on traditional methods will not work unless knowledge of high-speed circuit design is used.系统时钟应该使用时区选择显示在屏幕的底部正确的日期和时间。
The system clock should use your time zone selection to display the correct date and time at the bottom of the screen.而当系统时钟达到120MHz时,除非使用高速电路设计知识,否则基于传统艺术设计的PCB名将会成休克状态。
And when the system clock reaches 120MHz, PCBs based on traditional methods will not work unless knowledge of high-speed circuit design is used.我真的不确定为什么有人会将其系统时钟从通用时间选项中去除,但很明显这是事实。
I'm really not sure why anyone would take their system clock off of the universal time option, but apparently it happens.通常系统时钟为16MHz,但对于ArduinoPro3,3V则为8Mhz。
Normally the system clock is 16MHz, but for the Arduino Pro 3.3V it is 8Mhz.系统时钟除以12,外部振荡器时钟源8分频,定时器0溢出或.
System clock divided by twelve, the external oscillator clock source divided by 8, Timer 0 overflows, or an.