영어에서 Bottom layer 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The top and bottom layers.
Bottom layer is made of coarse stainless steel wire mesh.
Construction engineering: upper or bottom layer of building.
Its top and bottom layers are non-woven fabrics.
Die-cutting should be done carefully to avoid damage to the bottom layer.
The bottom layer is acrylic adhesive with high temperature resistant.
The dried product discharged from the bottom layer can be packed directly.
Strew the bottom layer of sand, soil or conventional seal peat(5 cm).
Lamination of the upper layers to the bottom layers and the process of silkprinting.
Bottom layer PPGI(prepainted galvanised steel) color steel sheet.
They slowly drift in the bottom layers of the water, often with open eyes.
Bottom Layer+ fiber glass Layer+Printing Layer+ Wear Layer+ UV Layer. .
Client side Client side is developed on Flex technology,software webpage is based on flash, and bottom layer is with Socket.
Typically, the bottom layer is made of glass and the top layer is a plastic film.
The surface layer is about 0.5mm thick dissipative electrostatic layer, the bottom layer is about 1.5mm thick conductive layer. .
If under the bottom layer of plaster put a grid, you can not be afraid of pests such as moles and mice.
The excellent depth of focus of the PLCN4X objective enables quick and easy cell observation of the two bottom layers within a multi-layer tissue flask.
The bottom layer is the combination of one component glue combine and SBR, it's environmentally friendly and permeable.
The dried product will drop from the last layer of the drying plate to the bottom layer of the smell body, and will be moved by harrows to the discharge port.
The bottom layer with low mesh counts has coarse wire and can be tight bonded to the backing to make up one block.
While the top layer captures both luminance andcolor information, the middle and bottom layers with their larger surface area capture color information only.
Only when the top layer components are too dense, can some devices with limited height and low heat,such as chip resistor, chip capacitor, and paste Chip ICs are placed on the bottom layer.
Note: Single layer perforating, Bottom layer without hole can be realized during the double layer plastic.
The three layer structure: the upper layer is anti static PVC/ conductive rubber, the middle layer is EPDM(or urethane resin)foam rubber, and the bottom layer is conductive rubber.
Soft tenacity can make children safer when they are playing The bottom layer REM, surface layer EPDM color granules and MDI adhesive used all conform with the latest Shanghai, Shenzhen and national environmental standards.
With ceramic ultrasonic atomizer turning the mineral water molecule to water particle of which the diameter is farsmaller than skin pores, it can reach the bottom layer of the skin and be absorbed easily and efficiently.
And 3 the electronic components contained in the bottom layer 26 of the Advanced Smart Card(e.g., the antenna 31, battery 32, IC chip 35) are shown as they may be positioned in the integrated electronics assembly comprising the bottom layer. .
By way of example only, Minnesota Mining and Manufacturing's base primer product 4475® can be used forthis bond enhancing purpose, especially when the top or bottom layer material is PVC.
The management and monitoring layer mainly completes the functions from middleware to production management and scheduling and data storage, and responds to the command request of the data terminal transmitted from the bottom layer, and sends dispatching instructions.
The bottom rock layer is the oldest.