영어에서 Operating condition 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Dirty operating conditions.
Expert evaluation of dangerous operating conditions.
Operating conditions: 0 to 40.
BEARING PROPERTIES* Depending on operating conditions.
Operating conditions& physical characteristics.
Fitting type is selected depending on the operating conditions.
Operating Condition: driving over 20km/h.
It can therefore be utilized under different operating conditions.
Operating Condition: driving 55km/h or more.
Alerts generated when irregular operating conditions are detected.
Operating Condition: driving 60km/h or more.
Selecting the right filter medium depends on specific operating conditions.
Check of general operating conditions, including supplies and environment.
Professional designer team to match with your operating condition.
Operating Conditions Total Flow Rate Requested 129.6 m3/h= 36L/S.
Operators confirmed the operating condition of satellites SES-14, and Al Yah 3.
Bearings in these applications are subjected to very severe operating conditions.
In these operating conditions, the pressure relief valve is normally closed.
PC plugs, sockets and couplings are constructed for extreme operating conditions.
It provides the best operating condition by working with OEM vender and it saves.
Our remanufacturing services can restore your equipment to its original operating condition.
Optimize operating conditions and safety prior to construction through design visualization.
Actual performance results may vary depending on specific configurations and operating conditions….
ON/OFF panel: Equipment operating condition check, System On/Off, Sight/Launch permission.
Advanced: Anti-interference, waterproof, dustproof,workable in extreme operating conditions.
Also, operating conditions change very quickly, requiring rapid intervention and readjustment.".
The LVD-800 Series fail-safe level sensor monitors its electrical and mechanical operating condition.
Interrupt: An asynchronous operating condition that disrupts normal execution and transfers control to an interrupt handler.
Each solution takes into consideration the IC, external components, and operating condition to be able to compare expected performance.
The dry-sump lubrication uses a total of seven suction stages, while the oil pump ensures the optimum oil pressure for every operating condition.