영어에서 The deformation 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Improve the deformation ability of aluminum.
CNC milling plastic block must control the deformation of the product.
Strain: The deformation of material caused by external force.
Base board:(Impact side)High stiffness,high flatness, the deformation will not beyond.
In addition, the deformation and movement of the pot bearings were recorded.
Therefore in many cases it is necessary to measure the deformation of critical machine parts.
Main reasons: the deformation of 42 air cylinder and rail, electromagnetic valve damage and so on.
However, the most informative channels are the elasticity and the deformation data.
It provides a good solution for the deformation in small precision electrode machining; 5.
Shortening or lengthening the legs- this may depend on the characteristics of the deformation.
After entering the estimated R value, the deformation is adjusted on a sample of choice.
Structured light 3D scanners project a bright pattern on the subject and to observe the deformation.
In his later work,Cosserat studied the deformation of surfaces which led him to a theory of elasticity.
In the year that he arrived in Breslau, Kirchhoff solved a problem concerning the deformation of elastic plates.
Tungsten copper blank forging process, the deformation of the matrix material, there are two ways.
Some of the deformation is plastic and the material can recover when the stress is relieved.
With the perfect arrangement of W and Cu, tungsten copper W75 heat sink provides a best way to solve the deformation in some small precision machining.
The deformation of the concrete is first investigated at 14.5, 30, and 45 psi, the pressure is then released, and the same pressure steps are used again to measure the deformation.
These processes make the more accurate forming rollers,avoid the deformation during heat treatment and ensure the rollers preciseness and wear-resisting ability.
At high temperature(T> 0.8T g) the material can follow ahomogeneous mode of deformation, for which the shear bands completely disappear, and all the material participates in the deformation.
B speed is accelerated, the frequency of the deformation of the radial motorcycle tire increases significantly, the heat is increased, it is easy to break down.
It is used for the structural deformation of the forming hexagonal wire mesh, andadjustment of wire's starting deformation, it also can reduce the deformation of wire stress, have good effect.
FPC connector in the process of disassembly, in the opening of the connector lock cover, should pay attention to the operationstrength can not be too large, so as to cause the deformation and damage to the connector.
In order to improve the tenacity of tungsten wire and prevent the deformation under high temperature, it usually added some oxides, such as silica, alumina, potassium and so on.
To compensate also for the deformation of the structure due to temperature effects, the computation should be done considering the coefficient of thermal expansion(CTE) of the structure.
Myth has it that Schoop developed the concept when playing"soldiers" with his son and observing the deformation of lead pellets being fired from a toy cannon against a brick wall.