THREADED CONNECTION 한국어 뜻 - 한국어 번역

['θredid kə'nekʃn]
['θredid kə'nekʃn]
스레드 연결
threaded connection
실을 꿴 연결
나사 연결
screw connection
threaded connection

영어에서 Threaded connection 을 사용하는 예와 한국어로 번역

{-}
  • Colloquial category close
  • Ecclesiastic category close
  • Ecclesiastic category close
  • Programming category close
  • Computer category close
A: threaded connection.
실을 꿴 연결.
Coonection Type: Threaded connection.
Coonection 유형: 스레드 연결.
G= Threaded connection.
G = 스레드 연결.
I: Straight through threaded connection.
L: 똑바로 실을 꿴 연결을 통해서.
G= Threaded connections.
G = 연결을 스레드.
In the worst-case scenario, the threaded connection may fail completely.
최악의 경우에는 스레드 연결이 완전히 차단될 수 있습니다.
Threaded connections Inch(BSP).
나사 연결 인치 (BSP).
High Quality 97 Diaphragm Seals With Threaded Connection, which is sanitary.
스레드 연결을 가진 높은 품질 97 다이어 프 램 씰, 위생입니다.
Threaded Connection install easily.
실을 꿴 연결은 쉽게 설치합니다.
Freshwater outlet threaded connection: 1/2"internal thread;.
민물 콘센트 연결 스레드: 1/2 andquot; 내부 스레드;.
The nozzles are made of brass or stainless steel fitted with Neoprene seals.Female threaded connection.
분사구는 내오프렌 물개와 맞은 금관 악기 스테인리스로 만듭니다.여성에 의하여 실을 꿰는 연결.
GPT= Threaded connection, PT thread..
GPT = 스레드 연결, PT 실.
Home/Grease Valves/Lubrication Safety Valve AF-K10- Threaded Connection, Grease Lubrication Safety Valve.
처음 화면/그리스 밸브/윤활 안전 밸브 AF-K10 - 스레드 연결, 그리스 윤활 안전 밸브.
Panel and threaded connection optional, various cracking pressure;
패널 및 나사 연결 옵션, 다양한 크래킹 압력;
The Antiseize coating minimises potential follow-up costs of a stainless steel threaded connection.
Antiseize coating 스테인레스 스틸 스크류 연결의 잠재적 인 후속 비용을 최소화할 수 있습니다.
There are two threaded connection pressure ports.
개의 실을 꿴 연결 압력 항구가 있습니다.
Vibration resistance, under the nominal pressure, the valve should be able to withstand the amplitude of 2mm,frequency of 33 Hz 1/3 vibration, the valve on the threaded connection should not loose, there is no leakage.
개의 진동 저항은, 명목상 압력의 밑에, 벨브 2mm의 진폭,33 Hz 1/3 진동의 빈도를 저항할 수, 실을 꿴 연결에 벨브 풀면 안됩니다, 거기 없습니다 아무 누설도 있어야 합니다.
Lubrication Safety Valve AF-K10- Threaded Connection, Grease Lubrication Safety Valve.
윤활 안전 밸브 AF-K10 - 스레드 연결, 그리스 윤활 안전 밸브.
The threaded connection valve is within the screw to connected devices by connector and pipeline.
나사산 연결 밸브는 커넥터와 파이프 라인을 통해 연결된 장치의 나사 안에 있습니다.
Hanry Vickers, in 1936, invented pilot operated pressure valves as threaded connection series hydraulic control components.
Hanry 비커스는 1936에서, 나사 연결 시리즈 유압 제어 구성 요소와 파일럿 작동 압력 밸브를 발명했다.
For subplate mounting and threaded connection: porting pattern according to ISO 6264.
Subplate 설치와 실을 꿴 연결을 위해: ISO 6264에 따라 향하는 본.
Effective locking of the threaded connection, locking device and control and adjusting function.
스레드 연결의 효과적인 락킹, 락킹 장치 제어 및 조정 기능합니다.
Connection: Welding, welding, threaded connection, socket weld Shape: Equal Head Code: Round.
연결: 용접, 용접, 실을 꿴 연결, 소켓 용접 모양: 동등한 것 맨 위 부호: 둥근.
RV10-22 pressure relief cartridge valve is designed as pressure direct-acting, poppet function type, screw-in/threaded connection and cartridge style installation used for pressure relief valve to limit the hydraulic pressure in a presetting pressure in hydraulic circuit.
RV10-22 감압 카트리지 밸브는 압력 직동, 포펫 함수 타입, 유압 회로에서 프리셋 압력 유압을 제한하는 감압 밸브에 사용되는 스크류 - 인 / 스레드 연결과 카트리지 스타일 설치로 설계된다.
Vertical hydraulic oil check valve DXF series is used for hydraulic oil, one way check, vertical threaded connection isolated valve, usually installed in front of the hydraulic pump to protect the pump or in the oil return line in order to prevent oil return flow.
세로 작동유 체크 밸브 DXF 시리즈는 작동유에 사용되는 하나의 방법을 선택, 통상 오일 환류 흐름을 방지하기 위해, 펌프 나 오일 회수 라인을 보호하기 위해 유압 펌프 앞에 설치된 수직 나사 연결 격리 밸브.
Thread connection.
스레드 연결.
Inlet thread connection option: 1/2", 3/4" internal thread;.
입구 스레드 연결 옵션: 1/2 andquot; 3/4andquot; 내부 스레드;
Intake standard thread connection 1-1, 2 inch hold joint hoop;.
섭취 량 표준 스레드 연결 1-1, 2 인치 개최 공동 후프;
Without thread connection, high work reliability and security.
실 연결, 높은 일 신뢰성 및 안전 없이.
FDA/ ISO SS304 Two Peice Ball valve With Female Thread Connection.
FDA/ISO SS304 여성 실 연결을 가진 2 조각 공 벨브.
결과: 30, 시각: 0.2476

영어 문장에서 "threaded connection"를 사용하는 방법

Carefully tighten each threaded connection with an adjustable wrench. 6.
Quick, uniform and, foremost, safe cleaning without threaded connection damage.
Industrial flanges include threaded connection (Wire connection) flange and welding flange.
The threaded connection between the ball valve and the tap/trigger unit.
It has threaded connection and smooth throats for convenient wire pulling.
Flange threaded connection (threaded connection) flange, welded flange and clip flange.
Threaded connection is properly caped for safety against damage in transit.
Includes a threaded connection that screws into handle for easy replacement.
So would the proper correction be “a threaded connection [sic] elements”?
자세히보기

한국어 문장에서 "스레드 연결, 나사 연결"를 사용하는 방법

파이프를 연결하는 끝은 맞대기 용접, 스레드 연결 또는 소켓 용접 기계로 가공 될수있습니다.
나사 연결 시 지지되지 않은 벽과 천장은 일반적으로 전동 공구에 대해 특히 높은 요구수준을 요하는 연결부입니다.
알루미늄 플라스틱 플레이트는 감기, 절곡, 냉간 압연뿐만 아니라 리벳 팅, 나사 연결 또는 접착으로 접착 할 수 있습니다.
이 틈을 없애기 위해서 나사 연결 부위를 줄을 이용해서 깎아냈습니다.
우리는 트라이 - 클램프 , 용접, 나사 연결 등으로 나비 형 볼 밸브 를 제공 할 수 있으며,.
Hanry 비커스는 1936에서, 나사 연결 시리즈 유압 제어 구성 요소와 파일럿 작동 압력 밸브를 발명했다.
용접 부위와 나사 연결 부위에서 발생하는 부식도 단점 중 하나다.

단어 번역에 의한 워드

최고 사전 질의

영어 - 한국어