Ví dụ về việc sử dụng Conductive layer trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Two conductive layers are wound in to a cylinder shaped winding.
In this basic technology,only one side of the insulator is coated with a conductive layer.
All stripped of the semi conductive layer will have what kind of consequences?
There is electrode pattern printed along theedges distributes a low voltage filed over the conductive layer.
Outer conductive layer extruded and per-manently welded with the core insulation.
The bottom oneis a glass plate coated with a transparent conductive layer, usually ITO(Indium Tin Oxide).
Positive holes are much more mobile than the negative electrons,so they jump over the border to the radiating conductive layer.
Flex circuits with two conductive layers can be made with or without plated through-holes, though through-holes are usually provided.
As a result,the electrons do negatively charged emission layer, and the conductive layer becomes positively charged.
There are at least three conductive layer in a multilayer circuit board, two of which are outlayers, while the remaining one is synthesized inside the insulation board.
The surface layer is about 0.5mm thick dissipative electrostatic layer, the bottom layer is about 1.5mm thick conductive layer.
The transparent electrode material comprises a thin conductive layer of carbon nanotubes[6] formed on the base material of stretchable resin.
PVC insulated shielding installation cables(wires)are electrical cables that contain insulating conductors encased in a standard conductive layer.
The Earth is surrounded by a conductive layer of electrons and ions in the upper atmosphere, the ionosphere D layer at 60 km altitude,[3] which reflects VLF radio waves.
The stress cone installation will cause the insulation distance within the T body to be smaller,and the semi conductive layer will not overlap and destroy the full screen.
This can be done either by etching a single conductive layer to form a grid pattern of electrodes, or by etching two separate, perpendicular layers of conductive material with parallel lines or tracks to form a grid.
Following reports of Guglielmo Marconi's transmission of radio signals across the Atlantic Ocean(1901),Oliver Heaviside of Britain conjectures that an electrically conductive layer located in the upper atmosphere of the earth enables such waves to propagate over expansive distances despite the curvature of the planet.
The conductive layer inside the LED chip and the PN junction light-emitting layer form a high temperature of 1400° C or higher, and the high temperature causes partial melting into small holes, thereby causing LED leakage, darkening, dead light, short circuit.
The printing process is complex,since it relies on producing both the cell and a conductive layer that allows the electricity to flow out of the cells and into a larger system, but it is still cheaper than traditional production.
Through hole plating is typically accomplished by initially depositing a conductive material(e.g. electroless copper) in the PTH, or other features such as blind microvias, BMVs,which is typically followed by electroplated copper to increase conductive layer thickness.
By adapting the patterning process of the conductive layer, this technology enables applications with a broad range of pixel number and sizes, such as a one pixel, fully covered contact lens acting as adaptable sunglasses, or a highly pixelated contact lens display.
From the inside, the conductive layer of the single-point touch screen is only a flat panel, Control screen is divided into a number of flat on the plate a lot of relatively independent touch unit, each touch unit through a separate wire connected to the external circuit, all touch-control unit in the board was matrix arrangement.
In this method of imaging, the sensor array pixels each act as one plate of a parallel-plate capacitor,the dermal layer(which is electrically conductive) acts as the other plate, and the non-conductive epidermal layer acts as a dielectric.
The top layer is a polyester film with the same conductive and transparent layer coated on the down side.
Anti-static standard: Inner rubber layer is conductive, with specific resistance R.
This multi layer conductive PC&ABS sheet is used for the high precision embossed carrier tape.
Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance.
Form good conductive and flexible circuit or layer very easily.
PC Mono Layer Conductive Sheet is made by PC mixed with black carbon power, the surface resistance value is from 10e4 to10e6,Thickness can be from 0.2mm to 3.0mm.