Ví dụ về việc sử dụng Protective device trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Type1 Surge Protective Device.
Protective devices: Install fence around and the tail bumper.
Surge and interference protective devices.
Protective devices shall be installed(removed) using only instruments.
Welding machine and protective devices(device); .
Protective devices must communicate with the machine control system and(or) equipment so that.
Significant design criteria for the selection of SPDs and corresponding overcurrent protective devices in DC systems are.
Assessment of results: Protective device functions, battery system leaks, shell rupture, fire or explosion.
If you are going to be traveling,it might behoove you to carry around some sort of protective device, like pepper spray.
Type 3 surge protective devices are generally installed right in front of the end devices to be protected.
The corresponding tests to determine this value are carried out inconnection with the maximum permissible upstream overcurrent protective device(OCPD).
Typical components for these protective devices include gas discharge tubes(GDT) and transient voltage suppressor diodes(TVS diode).
In 2009, after the adoption of ANSI/UL 1449(3rd Edition), the term Transient VoltageSurge Suppressor was replaced by Surge Protective Device.
Surge protective devices(SPDs) are generally classified according to their performance values, depending on the protection class and location of use;
Anti-static devices: including ground towing, static line plate, copper, copper layout in the work rig(a)and side protective device location before.
The protective device will stop operating automatically to avoid damaging expanding rod, once expanding rod run into unexpected case and bend.
If the average testresults exceed 400N in force an appropriate protective device(e.g. resistive Safety Edge) should be fitted to the gate and the tests carried out again.
Surge Protective Devices(SPD) are used to protect electrical equipment against surges(overvoltages) caused by lightning or switch of heavy duty machines(many people may ignore this).
If the cable length between PV panels and inverters exceeds 10 m,install an additional protective device at the other end of the cable in the area of the PV panels to protect these effectively.
The final overcurrent protective device before the SPD must not exceed the maximum nominal value of the upstream overcurrent protective device as specified by the SPD manufacturer.
There are tons of ways that you can turn those old buckets into things that you can use for your garden,including a great protective device that keeps rabbits and other critters from eating your plants.
In the first case, the F2 separate overcurrent protective device ensures that this is triggered in the event of an SPD failure, e.g. due to a short circuit.
This machine is used for small to middle motor stator coil forming after coil insertion, could shape the stator end coil OD, ID and height approaching to required size via initial extruding, and good for the next coil lacing process,with single-tooth slot insulation protective device.
Put the phone in the roller- close the clear cover and protective device- the roller rotate in the direction of counter clockwise driven by motor- drop twice by rotate one cycle.
The DT-CAT-6AEA protective device optimally protects sensitive equipment, as quickly reacting protective components are used for the data cabling as well as for the PoE system.
Large walk-in constant humidity andtemperature testing machine is equipped with advanced security, protective device leak circuit breakers, over-temperature protective device, lack phase protective devices and lack water protector.
LATT2200 SD1-1 Surge protective device for antenna feeder, connected between the antenna and transceiver, is ideal for protection of I/O interface of information transmission systems using coaxial cable from lightning induction, transient overvoltage and surge current.
In addition, the energy absorbing andshock absorbing characteristics of the honeycomb structure can be utilized as a protective device, such as installing the honeycomb panel on the front of a high-speed train, and protecting the personal safety of the vehicle in the event of an accident.
Rack and guide adopt fullly enclosed protective device, which prevents oil free friction movement and dust pollution, enhances using life of transmission parts and ensures the precision of machine tool movement.
The PROTECT andPUSH POWER messages will flash alternately when the protective device of the amplifier has been activated because a strong signal was input, or if there is a short-circuit detected.