Ovenstående målinger gælder selvfølgelig kun for de kredsløb jeg har målt på, men giver en god ide om hvad der kan forventes fra LiIon beskyttelses kredsløb.
The above measurements are only valid for the circuits I have measured on, but gives an indication about what to expect from LiIon protection circuits.
Undlad at prøve de paralleller på den måde:Jeg kender denne måde alle sammen. Jeg har målt at bundløst nat, og alle de lys og alle glæde af mit liv gik derude.
Do not try the parallels in that way:I know that way all along. I have measured that bottomless night, and all the light and all the joy of my life went out there.
Jeg har målt byggepladserne op.
I walked and measured the sites.
Jeg kan dog sige at mange roere der har en flot, ogeffektiv stil med en pagajskivning på 70°, og jeg har målt 74° blandt landets absolut bedste kajakroere!! Pagajmåler Home.
I have observed however, that a lot of paddlers with a feathering at 70°,has an elegant and effective style, and I have been measuring 74° on the paddles of some of Denmark 's best paddlers.
Kredsløbet har et spændingstab op 60mV ved en strøm på 1 A og 2.9 volt batterispænding.Ovenstående målinger gælder selvfølgelig kun for de kredsløb jeg har målt på, men giver en god ide om hvad der kan forventes fra LiIon beskyttelses kredsløb.
Voltage drop in circuit at 1 amp and 2.9 volt battery voltage:60mV The above measurements are only valid for the circuits I have measured on, but gives an indication about what to expect from LiIon protection circuits.
Skat, jeg har målt, og loftet er for lavt i soveværelset.
Honey, I measured and the ceiling's too low in the bedroom.
Jeg har tilsluttet plade feeder eksterne“+” VDC“-” for GND og den IN4 jeg har tilsluttet den HINDBÆR gpio4, og der, når jeg aktiverer GPIO,intet sker. Jeg har målt GPIO og giver 3,3 v. Jeg har læst om andre steder og det siges at det er fordi jeg skal tilslutte jumper VDC-JCC af ellers.
I have connected the plate feeder external“+” the VDC“-” the GND and the IN4 I have connected the RASPBERRY gpio4, and there when I activate the GPIO,nothing happens. I have measured the GPIO and gives 3,3 v. I have read on other sites and it is said that it is because I have to connect the jumper VDC-JCC of otherwise.
Jeg har målt aktivitetsniveauer i inhibitoriske celler i månedsvis.
I have been measuring levels of activity and inhibitory cells in VPA rat brains.
Han skrev(se eller): Jeg har måltmig fra højden til den dybde, og hvad jeg kan gøre, og hvad jeg burde gøre, og jeg gør det.
He wrote(see or): I have measured myself from the height to the depth; and what I can do, and what I ought to do, and I do it.
Jeg har målt aktivitetsniveauer i inhibitoriske celler i månedsvis.
And inhibitory cells in VPA rat brains. I have been measuring levels of activity.
Jeg har målt at bundløst nat, og alle de lys og alle glæde af mit liv gik derude.
I have measured that bottomless night, and all the light and all the joy of my life went out there.
Jeg har målt husets elektromagnetiske stråling. Vi ser, om den ændrer sig.
Uh, I measured the normal electromagnetic readings of the house, and we will find out if that number changes.
Jeg har måltmig fra højden til den dybde, og hvad jeg kan gøre, og hvad jeg burde gøre, og jeg gør det.
I have measured myself from the height to the depth; and what I can do, and what I ought to do, and I do it.
Jeg har målt GPIO og giver 3,3 v. Jeg har læst om andre steder og det siges at det er fordi jeg skal tilslutte jumper VDC-JCC af ellers.
I have measured the GPIO and gives 3,3 v. I have read on other sites and it is said that it is because I have to connect the jumper VDC-JCC of otherwise.
Jeg har målt lysmængden fra lygterne, dette viser at de fleste 1xAAA lygter er forholds tæt i lysmængde når de bruger NiMH batterier, men med LiIon kan lysstyrken stige ret kraftigt.
I have measured the light output with a ceiling bounce, this shows that most of the 1xAAA lights here are close in output when using NiMH, but when using LiIon the brightness can increase drastical.
Jeg har målt lysmængde fra alle lygter og de fleste 1xAAA lygter er nogenlunde lige kraftige, PT1 har 2xAAA, men bruger kun det ene til lygten, når vi kommer til 2xAAA er det kun Preon II som rigtig udnytter det, den mere end fordobler lysstyrken i forhold til Preon I.
I have measured the light output with a ceiling bounce, this shows that most of the 1xAAA lights here are close in output(Note: PT1 is 2xAAA, but only uses one AAA for the light). With 2xAAA only Preon II is really taking advantage of the increased power with more than double light output compared to Preon I..
English
Deutsch
Español
Suomi
Français
Norsk
عربى
Български
বাংলা
Český
Ελληνικά
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文