Eksempler på bruk av Depth should på Engelsk og deres oversettelse til Norsk
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Their depth should be 15-20 sm.
A seed well can be made with a finger, its depth should not exceed 1.5 cm.
Here mine depth should not exceed 100 cm.
If there are signs of mold or insect attack, the depth should be checked immediately.
Their depth should be about fifteen centimeters.
If you intend to install countertops in as kitchen table, The index in depth should be 50-80 cm.
Note that the depth should be no more than 2 mm.
That is, if the height of the support column 2 is m-meter,instillation depth should be at least 50 cm.
The depth should be at least 0.8 m, preferably 1 m.
As in the natural source, axial depth should be somewhat greater than the coast.
Their depth should be slightly greater than the height of the roots.
They grow well in slightly acidic waterlogged soil,planting depth should be about 5 cm, but we can not allow the drying of the soil.
Their depth should not reach 3 cm to the line of the toporishcha.
For both support washers and guide elements, a polished surface with hardness of 58HRC is sufficient,and case depth should be 0.60mm min.
The foundation depth should be deeper than the freezing zone in the area.
Electrode placement depth should be below the frost level ground.
Its depth should be about a meter, and its diameter should be 65 cm.
Bored after allowed to stab the nature of the dimpling,dimpling depth should not be more than 0.4 P, counter boring too much is bad for wire sets of installation.
The depth should be at least 50 cm, so that the system does not interfere with the growth of horticultural crops and their processing, carrying out landscaping.
Seam sealing joints in depth should beadopted into a suitable backing material toadjust.
Its depth should be 10 centimeters more than the length of the dog, the height is not less than the height of the pet to the tips of the ears, and the width is 5-10 centimeters more than the height.
The cutting depth should be greater than the thickness of the oxygen-rich layer.
Its depth should be such that the site of inoculation(convex bulge on the transition from the roots to the stem) is secreted into the ground at 5 cm for tea and spray roses, 7-10 cm- for pletistyh and tall.
Strip foundation depth should be below the frost level in view of sand cushion.
The hole in depth should reach 16 cm, since this is a triple height of the bulb, if you count from its bottom.
For example, the depth should be more booth 5 cm than pet length from nose to tail.
When threading the thread depth should not be more than 50 to 60 percent because molybdenum tends to chip, Molybdenum can be rolled treaded.
Then, sufficient depth should be available to the outfitting of the wall, where will be completed the ship, and besides, she has to be the right length.
Let's start with water depth; water depth should not be a problem providing you use a fixture capable of producing enough intensity(PAR), and at the correct spectrum for growing corals.