Exemplos de uso de Dissolved solids em Inglês e suas traduções para o Português
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Remove dissolved solids at the ionic level.
Evaporation ponds are shallow ponds that concentrate dissolved solids through evaporation.
Salts and dissolved solids can be removed by using a reverse osmosis behind AQUALOOP.
The basic formula for calculating total dissolved solids looks like the above illustration.
The series PURELAB Option E shows an excellent economic performance for high volume production andin areas where the source water has a high content of dissolved solids.
The concentration of total dissolved solids(TDS) is a measure of the amount of dissolved material in water.
Modern uses include concentrating brine solutions used in leach mining and removing dissolved solids from waste streams.
Monitors conductivity, an indication of dissolved solids concentration(leading to buildup of scale), so that adjustments to blowdown rate can be made.
We evaluated four levels of salts in the drinking water of animals: 640- bass; 3188- mid; 5740- high and8.326mg/ l- very high total dissolved solids tds.
To prevent excess mineral build-up total dissolved solids concentration must be closely monitored.
Introduction: The Ultra Filter Membrane is made of the fabric,the aperture of the fabric is less than 0.01 micron so it can remove the dissolved solids, organics anf bacteria etc.
The parameters evaluated were: water temperature(t), dissolved oxygen(do),total dissolved solids(tds), chlorophyll_a(chl); total phosphorus(tp), secchi transparency(airborne) and turbidi.
Total dissolved solids(TDS) is a measure of the dissolved combined content of all inorganic and organic substances present in a liquid in molecular, ionized or micro-granular(colloidal sol) suspended form.
The water was analyzed temperature, electrical conductivity(ec), saline(sal),total dissolved solids(tds), ph, turbidity and the amount of dissolved oxygen ldo.
Total dissolved solids(or TDS) is the measure of all organic and inorganic substances dissolved in a given liquid, revealing the proportion of different solids. .
It is recommended that Netafim expert advise is sought on water quality analysis for pH,suspended solids, dissolved solids and bacterial population.
In such cases, the total dissolved solids(TDS) concentration of the water can be increased from the dissolution of minerals from the acid-neutralization reaction with the minerals.
The parameters analyzed for twelve months between the years 2014 and 2015 consist of: temperature, ph, conductivity, turbidity, dissolved oxygen,total dissolved solids, alkalinity, color, sulfate, hardness.
Mathematics 2 356 Total dissolved solids(or TDS) is the measure of all organic and inorganic substances dissolved in a given liquid, revealing the proportion of different solids. .
For versatility in the field or the laboratory, the PHH-60BMS/TDS and PHH80BMS/TDS feature the ability to make pH,conductivity and total dissolved solids measurements in one handheld instrument.
It takes into consideration total dissolved solids, flowrate and the decreasing activity of ions to provide an accurate measurement of the amount of resin remaining in your deionization system.
Major components include: a water reservoir, a pump, a flow adjustment valve,a repurification cartridge and a Total Dissolved Solids(TDS) purity monitor.
The analyzes determined the following characteristics: ph, ras, temperature, conductivity,total dissolved solids, turbidity, calcium, magnesium, sodium, potassium, chlorides, sulfates, salmonella, total and fecal coliforms.
Comply with the newly RO technology, our RO system is designed for places where feed water has very low water pressure(under 45PSI), orwhere the source water contains higher than normal amount of dissolved solids.
Water testing pen TDS used to test the water,also known as the total dissolved solids, measured in units of mg/ L(mg/ L), it shows that 1 liter of water dissolved in the number of milligrams of soluble solids. .
According to the AAMI, the characteristics associated with water quality that should be analyzed are: bacteria, endotoxins, total organic carbon, pH,hardness, dissolved solids, ionic contaminants, color and turbidity.
The 15 analyzed variables were: electrical conductivity(ec), total dissolved solids(sdt), ph, alkalinity, bicarbonate, total hardness, soluble phosphorus(ps); ions: chloride(cl-), fluoride(f-), nitrate(no3-), sodium(na+), potassium(k+), calcium(ca2+), magnesium(mg2+) and sulfate so4 2.
Water samples were subjected to physical and chemical analyzes in situ(ph, eh, temperature, dissolved oxygen, turbidity,electrical conductivity and total dissolved solids) and metal content, alkalinity, sulfate and chloride in the laboratory.
For each collected sample were made determinations of the parameters: temperature, dissolved oxygen, ph, electrical conductivity,total dissolved solids, turbidity, total hardness; ions chloride, fluoride, nitrate, nitrite, phosphate, sulfate, sodium, potassium, ammonium, calcium and magnesium; total phosphorus, sodium adsorption ratio.
Collection campaigns between november 2013 and february 2014n were performed in which the following parameters were determined for the calculation of wqi/nsf: do, bod, total nitrogen, total phosphorus, turbidity, temperature,total dissolved solids, ph and coliform thermotolerant.