Examples of using Dissolved solids in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
C Standard Methods for total dissolved solids dried at 180 C.
In solution or dissolved solids cannot be filtered, they must be diluted or treated.
Conductivity in water solutions is measured and converted to total dissolved solids TDS.
Relationship or ratio between the dissolved solids and the total acidic juice.
Dissolved solids and other contaminants cannot pass through the membrane and are sent to the drain as reject water.
The extract corresponds to the dissolved solids- mainly sugars- in the wort.
The main applicationfor thermal evaporation is separation of a solvent(in most cases, water) from dissolved solids in a solution.
To prevent excess mineral build-up total dissolved solids concentration must be closely monitored.
Description: These portable, economical meters can simultaneously measure conductivity, specific conductance, salinity,TDS(Total Dissolved Solids) and temperatur….
The downstream reverseosmosis step was applied to reduce dissolved solids, such as chloride, sodium, hardness and other ions.
Examination of parameters of cleaning solutions, i.e. total acidity, pH, temperature,electrical conductivity, TDS parameter- Total Dissolved Solids.
Test the amount of total dissolved solids(TDS) in the liquids in the range of 0-9990ppm at a high accuracy of±2% F. S.
The western reference water is an Na-SO4-(Cl-HCO3) type with total dissolved solids of 1.0 g/l.
It takes into consideration total dissolved solids, flowrate and the decreasing activity of ions to provide an accurate measurement of the amount of resin remaining in your deionization system.
The eastern reference water is an Na-HCO3-SO4-(Cl) type with a total dissolved solids content of about 0.5 g/l.
Total dissolved solids(or TDS) is the measure of all organic and inorganic substances dissolved in a given liquid, revealing the proportion of different solids. .
One cubic mile of seawater contains about 40 million minerals,total dissolved solids(TDS)- cations are calcium, magnesium, sodium and potassium, and anions of.
With the salt meter PCE-CM 41 it is possible to measure conductivity value, theamount of all the solid material or dissolved salts(TDS- Total Dissolved Solids) and the temperature.
This reverse osmosis system containsa replaceable treatment components, critical for the effective reduction of total dissolved solids and that product water shall be tested periodically to verify that the system is performing properly.
With the Water Analysis Meter PCE-CM 41 it is possible to measure conductivity value,the amount of all the solid material or dissolved salts(TDS- Total Dissolved Solids) and the temperature.
Fully Validated Systems for Ultra Pure Water Bio-pharmaceutical producersdemand high quality water with the fewest dissolved solids possible, for consistency in a variety of processes.
The chemistry of water in the upper crystalline section is virtually identical in all samples.It is a sodiumbicarbonate water with pH of about 8 and a total dissolved solids content of 1,000 to 1,110 mg/l.
It has been suggested that Paradox Basin unconventional oil andgas development has been hindered by high total dissolved solids and water handling challenges and costs.
It is used either alone or in combination with processes such as ionexchange in a variety of applications where the total dissolved solids(TDS) concentration in water has to be reduced.
Initial indications from the observation wells and the pumping wells point to high flow rates of greater than 100 cubic metres perhour as well as very low dissolved solids, indicating the water is likely suitable for solution mining and processing.
Water will be tested for conductivity as the holes are drilled and water samples will be analyzed for physical properties(conductivity,total dissolved solids, pH) to help identify brine-bearing aquifers.
Moreover special purposes such as dissolving solids in liquids, polishing metal or plastic parts, moving inert media to avoid structural changes and cleaning containers by means of solvents.
The membrane, according to the principle of reverse osmosis, separates the dissolved solid compounds such as calcium, chlorides, nitrates, etc.
The container mixer JEL CM is mainly used for mixing,homogenizing and dying components in the form of powder or granules and for dissolving solids in liquids as well as for all other mixing jobs.» Further information.
The water is very mineralized, with over 1g/l dissolved solid ingredients, exceptional hyperthermal value which can be cooled to certain temperatures for usage, depending on the indication. The composition of this water consists of significant amount of dominant sodium ions, magnesium, calcium, bicarbonates and dissolved hydrogen-sulfide which is well absorbed through the skin, showing beneficial healing effects, especially when it comes to rheumatic and skin conditions.