Exemplos de uso de Silicon content em Inglês e suas traduções para o Português
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Silicon content of more than 80.
Its oxidation resistance is enhanced by the silicon content.
The oxidation resistant is well enhanced through silicon content.
The gmaw process silicon content was compared with gmaw-cw and gmaw- dcw processes.
Carburization and oxidation resistance to about 2100°F are enhanced by the silicon content of the alloy.
The silicon content in this material improves oxidation and carburization resistance;
Limited by its own characteristics, the carbon and silicon content of rimmedsteel is relatively low.
If the silicon content is excess, high temperature performance will deteriorate and the casting fragility will increase.
In addition to being a toxic element to plants,Al3+ may also serve as an indicator of silicon content in the soil.
Through this model it was possible to predict the silicon content and sulfur and to determine the influence of each operating parameter.
Lower silicon contents also improve the properties of stainless steel, which also applies to the elements manganese, phosphorus and sulfur.
The crystalline grade is considered to be of higher quality because it has higher silicon content. The crystalline grade is further classified under the types black and green.
Analyses by eds(energy dispersive x-ray) of sem(scanning electron microscope)were made to obtain silicon content values.
On the other hand,high silicon content can promote cast iron to form dense silica oxide film to prevent oxidation.
The sapo-5 is a member of the family of silicoaluminophosphates,is a microporous material with large pore and possess a variable silicon content, therefore a mild acidity.
Silicon content and total chlorophyll did not differ significantly from treatments, while stomatal conductance, transpiration and momentary water use efficiency had significant effects with si and as applicati.
Too much size increase caused by molybdenum silicon, the use of high silicon content results of ferrosilicon powder silicon content lower than the good.
This is due to its silicon content, a mineral that improves the absorption of calcium. Consequently, the body can store more calcium apart from regenerating and strengthening the bone system.
Ferrosilicon powder before use must be accurate silicon, aluminum content analysis, silicon content of 75% -77% requirements, size requirements are.
Ni-Mo alloy Hastelloy B-2, the carbon and silicon content is extremely low, reducing the HAZ carbon and other impurities precipitation, so the weld has sufficient corrosion resistance.
The product under consideration is the same as in the investigation which lead to the imposition of the existing measures, i.e. silicon metal originating in the PRC,classifiable within CN code 2804 69 00 silicon content less than 99,99% by weight.
Particle size is too general cause elevated molybdenum silicon, using high silicon content of ferrosilicon powder is better than a good low silicon content.
M steel was developed from high-strength steel sae 4340, the goal of this improvement was get better toughness and weldability in applications requiring improved mechanical properties; with small changes in alloy elements,addition of vanadium and especially the silicon content.
The aim of this work was to develop a new analytical method for determining silicon content in polyolefins using the same kind of ziegler-natta catalyst and maintaining the additive of each commercial resin.
This research was conducted with the objective of evaluating the agronomic response to the application of silicic and salicylic acid applied by foliar in maize cultivated in the second harvest,methodologies were also used for plant evaluations, such as silicon content, gaseous components, production components and corn grain yield.
When the content of copper andiron in aluminium alloy is long, the silicon content should be reduced to less than 10.5%, and the pouring temperature should be appropriately increased so that the silicon can be precipitated.
Greater segregation of molybdenum and silicon and molybdenum content in the ingot lower than 2% higher than the upper,while the center of the slightly higher silicon content in the upper and middle parts of the maximum difference of about 0.7.
Greater segregation of molybdenum with silicon and molybdenum content in the ingot bottom 2% higher than the upper,while the center of a slightly higher silicon content in the upper and middle parts of the maximum difference of about 0.7.
Silicon molybdenum content has some impact on its high temperature properties.