Exemplos de uso de The ethernet cable em Inglês e suas traduções para o Português
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Remove the Ethernet cable from the printer.
Smart Link: Network setup with WiFi,unplug the Ethernet cable.
Disconnect the Ethernet cable from the printer.
Note: If you are connecting to a computer,use the Ethernet cable included.
Make sure the Ethernet cable is plugged into your computer and into the network.
Do NOT turn off the power or cut down the Ethernet cable during upgrade process.
Connect the Ethernet cable to the Ethernet port on the back of the printer.
Unplug all USB devices,external hard drives and even the Ethernet cable, if connected.
If not, please try to change the Ethernet cable, LAN port and computer to carry out a test.
If the printer is still connected to an Ethernet network,disconnect the Ethernet cable.
Firmly plug one end of the Ethernet cable into the printer.
Simply plug the Ethernet cable into its Ethernet port to easily turn your wired internet connection into a dual band wireless access point.
Notes: To ensure reliable communication using 1000 BaseT operation, the Ethernet cable must not exceed 100 meters.
Once you connect the Ethernet cable, OS X automatically configures your connection using DHCP.
If the printer was previously set up on an Ethernet network,make sure the Ethernet cable is disconnected.
Firmly plug the other end of the Ethernet cable into the network hub or wall connection.
Once you connect the Ethernet cable, OS X automatically configures your connection using DHCP.
 If your Mac doesn't include a built-in Ethernet port,you can use an adapter  to connect the Ethernet cable to the USB or Thunderbolt port on your computer.
Connect the other end of the Ethernet cable to an available Ethernet port on a router or wall jack.
 If your Mac doesn't include a built-in Ethernet port, you can use an adapter  to connect the Ethernet cable to the USB or Thunderbolt port on your computer.
If you are looking for the Ethernet cable facts, you will find 10 tips in our Ethernet Cable Hacks Guide.
To make the first setting you should fit the Repeater in the socket and connect the ethernet cable(Blue) between the device and your computer.
This also means that the Ethernet cable that is connected to a PoE switch will not supply any power if it is not connected to a PoE-enabled device.
Note: If the printer does not join the wireless network after the Ethernet cable is disconnected, turn the printer off and then back on.
If there is at the end of the name a P,then PoE is supported and via the Ethernet cable, for example, then a monitoring camera can be supplied with power.
Connect one end of the Ethernet cable to the router and the other end to the Ethernet socket on the television.
If you need networking(netboot image)plug the ethernet cable into the socket on the front of the machine.
Also connected in the Chromecast Ultra the Ethernet cable, whose other end is connected in Switch TP-Link TL-SG1024DE V2, that is also in the living room.