Exemplos de uso de Typical values em Inglês e suas traduções para o Português
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Okay, and what are typical values?
Typical values are e.g. 6819 and 18597 ÂμA.
The table below shows typical values for stars along the main sequence.
Typical values for water quality parameters.
While the standard deviation does measure how far typical values tend to be from the mean, other measures are available.
Typical values for N and K are 20 and 2, respectively.
Ok, we know that RTWP can help us in checking the uplink interference,then we need to know its typical values.
Some typical values for physical properties of steel are.
In general, the coefficient Ks can be determined in three ways: plate tests,tables of typical values and through correlations with elastic modulus.
The typical values of some physical properties are given in the table below.
The purity of amphetamine samples intercepted in Europe in 2006 varied considerably andto such an extent that any comment on typical values must be made with caution.
Typical values for H1 are 7 m with silicone oil and 4 m with halocarbon oil.
At the bottom there is also a table with typical values of ESR for electrolytic capacitors as the capacitance and voltage.
Typical values of this type of filter capacitor are 220uf 250volt and 330uf 400volt!
Although there are typical values of KPI, there is not an optimal value. .
Typical values of carbon equivalents are given in our product data sheets.
We will then know the typical values, and know what must be done in case of problems.
Typical values are T 100 ms or T 500 ms, but the duration may also be longer or shorter.
In the following charts, the typical values for the temperature coefficient"TK Process" are listed apart from the dimensions.
Typical values for the viscosity index are 95(for normal or"single grade" oils) and between 125 and 150 for"multigrade" oils.
It is stable to temperatures as high as 400 °C. The following table gives typical values of vapor pressure of ferrocene at different temperatures: Ferrocene undergoes many reactions characteristic of aromatic compounds, enabling the preparation of substituted derivatives.
Typical values for water quality parameters for un-polluted and polluted water are shown in the table below.
Education and training. typical values which can vary between national systems,"academic year" is normative"Erasmus Mundus credits" PDF.
Typical values for activation voltages obtained via this experiment are shown on the right, together with wavelength values for the light emitted by colour LEDs.
The possible results and typical values observed during such test, depending on material behaviour, are summarised in the following graph.
The following table lists typical values of the dielectric absorption for common film materials Polypropylene film capacitors have the lowest voltage values generated by dielectric absorption.
The following table gives typical values of vapor pressure of ferrocene at different temperatures:==Reactions=====With electrophiles===Ferrocene undergoes many reactions characteristic of aromatic compounds, enabling the preparation of substituted derivatives.
The typical value in our case is 1.5:1.
Command to initiate the system halt. Typical value:/ sbin/ halt.
Command to initiate the system reboot. Typical value:/ sbin/ reboot.