Exemple de utilizare a The cross-section în Engleză și traducerile lor în Română
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Marius, to show you this in the cross-section.
The cross-section depends on their placement area.
I histoed the wound and checked the cross-section.
But the cross-section of redwood trunk was still in Muir Woods.
Basic method for calculating the cross-section of a wire.
The cross-section of the timber should be 50 X 25 mm.
You actually see how the lenses are cut together in the cross-section pattern.
The cross-section of the beam should be from 3 to 5 cm.
Locating the maximum reduced stress in the cross-section of a bar.
The cross-section of the ventilation element is 258 sq.
If you have decided on energy consumers,we can calculate the cross-section.
It's the cross-section of four numbers(in the shape of a square).
Design methods for optimum use of all materials in the cross-section.
Otherwise, the cross-section of the profile pipe may deform.
For convenience of choice,you can use the table to select the cross-section of the cable.
It affects the cross-section of the tool and its application.
On the Internet there is a large number of on-line calculators for calculating the cross-section of wires.
It makes the hair elastic and strong, and also prevents the cross-section of the tips.
Optimum use of all materials in the cross-section at Ultimate and Serviceability limit state.
The cross-section of the ventilation holes is calculated based on the proportion: 24 mm.
The cross-section is a isosceles right-angled triangular prism called the total reflection prism.
It is from the power P1 that the cross-section area of the core S depends.
The cross-section of a cable or an electric wire is recommended to be selected with a small margin for current.
We observe that NEd= 336.3kN> the cross-section chosen for bracing member is not efficient;
The cross-section of the rod body is I-I, from the big head to the small size gradually become smaller.
If fouling does occur in the heat transfer channel, the cross-section of this part of the channel is decreased.
However, this should be done only after careful study of the neutral conductor at the cross-section at least 16 Blocks.