Exemples d'utilisation de Pairing process en Anglais et leurs traductions en Français
{-}
-
Colloquial
-
Official
The pairing process will begin. 6.
Try repeating the pairing process.
If the pairing process is not completed.
This will launch the pairing process.
The pairing process is a little different.
Prepare your telephone for the pairing process.
Attempt the pairing process again.
Pairing process takes about 14 seconds.
Typically, the pairing process is permanent.
The following paragraphs describes the pairing process.
The pairing process is a little different.
Select“Yes” to begin the pairing process.
The pairing process starts automatically.
Select Pair to complete the pairing process.
Repeat the pairing process see page 19.
Add a Bluetooth device to begin the pairing process.
Start the pairing process on your mobile device.
Select'DALI KUBIK ONE' and finalize the pairing process.
Repeat the pairing process by pressing the‘LEFT' arrow.
You need to repeat the above steps 2-5 to restart the pairing process.
Pairing process may vary between different Smartphone devices.
The Smart Touch Control will perform the pairing process described on page 8.
Pairing process is not completed within one minute, the 10R will.
You may need to start the pairing process from the headset.
Once the pairing process is completed, the B-Speech Pago is ready to use.
Select this option and complete the pairing process for your device.
Check that the pairing process on the other device has been completed.
This section explains everything you need to know about the pairing process.
Follow the pairing process to connect the hearing aids to the iPhone.
First make sure the camera's pairing process was successful.