Examples of using Coefficient of friction in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Good flatness and coefficient of friction.
Low coefficient of friction allowing reduced wear of equipment.
HMPE has a very low coefficient of friction.
Coefficient of friction Relatively high Depends on lubrication, load and speed Very small.
Mud slippage changes the coefficient of friction from point seven to point three.
People also translate
Okay, we need something strong yet pliable that can withstand the coefficient of friction.
And remember coefficient of friction are unitless.
Nylon Filter Cloth is of Good abrasion resistance and low coefficient of friction.
With low and smoothly coefficient of friction and without stick-slip effects;
Nylon Micron Filter cloth is of good abrasion resistance and low coefficient of friction.
The grease will lower the coefficient of friction between the train track and the train wheel.
It is used in a variety of industries and applications to reduce the coefficient of friction.
Very lubricious- lowest coefficient of friction of any polymer FDA approved raw material.
Rugged high-density fiberboard, EVA cushioninglayer for comfortable feet, smooth layer with low coefficient of friction.
But when I run the coefficient of friction, even with Doug in the trunk, the car doesn't move.
It does not change its property whether in high temperature or low temperature,and its low coefficient of friction can be used as lubrication.
Very lubricious- lowest coefficient of friction of any polymer FDA approved raw material.
Extruded aluminum ASTM6005 body with bath internal and external corrosion protection having honed cylinder surfacefor longer life and low coefficient of friction.
The coefficient of friction is generally 0.1 to 0.3, which is 1/3 of babbitt and 1/4 of phenolic plastic.
It is a material with -50 +80 ° C heat range,low coefficient of friction, and without slipperiness, water and humidity absorbance.
If the coefficient of friction is lower than 0.35, the braking will exceed safe braking distance and even braking failure.
In contrast,a higher surface speed has less impact on the coefficient of friction of CSB-EPB14 bearing(Graph EPB14-4 and EPB14-5).
Extruded aluminum ASTM6005 body with bath internal and external corrosion protection having honed cylinder surfacefor longer life and low coefficient of friction.
Compared with other types of bearings of the same size, the coefficient of friction of such bearings is small, and the speed limit is high.
Coatings on cutting tools reduce the coefficient of friction at all operating speeds but it is at higher speeds that the difference between coated and uncoated tools is greatest.
Wide symmetrical fins are smoothly beveled on the both ends to have lower coefficient of friction and to ease casing movement in either direction.
So given this, let's calculate another coefficient of friction but this is going to be the coefficient of kineticfriction because now we're moving down the block.
Excellent release properties, high temperature, chemical, moisture & tear resistance,dimensional & mechanical stability, low coefficient of friction and superior dielectric properties.
PTFE is an ideal material forball valve seats due to its low coefficient of friction against metals, chemical inertness and general effectiveness as a sealing material.
PTFE is well known for its outstanding resistance to chemical attack, low coefficient of friction and wide temperature tolerance including cryogenic service.
