Examples of using Friction surface in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
To make the oil film can smoothly enter the friction surface.
The friction surface of the brake must be kept clean and sludge contamination is strictly prohibited.
The high load capacity, especially suitable for rough friction surface;
The foreign advanced technique, it have no friction surface, no lubricating oil, have tighten.
Extremely high bearing capacity, especially for rough friction surface;
Our teams consist of professional high friction surface treatment contractors who are well-trained.
Extremely high bearing capacity, especially suitable for rough friction surface;
Various holes and pits can be processed on the friction surface, and certain grease can be stored.
The friction surface of this product is prohibited from contact with oil items to prevent frictional performance.
Various oil groove,hole and hole can be processed on the friction surface.
Oil pumps are forced feed to oil to each friction surface under raising oil pressure and ensuring engine oil capacity.
Block the housing: It is made of light alloy and is located inside the shirt,forming the friction surface with the rotor.
Friction surface layer can be secondary processing, bearing into the seat hole after processing, can further improve the accuracy of fit;
The brake calipers contain two brake pads whose friction surfaces face the rotor.
The lubricant or grease between the friction surfaces can greatly reduce adhesive wear,surface fatigue wear, abrasive wear and corrosion wear.
Two brake pads are contained in the brake caliper with their friction surfaces facing the rotor.
The brake friction surfaces must be kept clean, brake parts should be regularly check, prevent brake failure occured in the matter since the fall phenomenon.
Two brake pads are contained in the brake caliper with their friction surfaces facing the rotor.
Can be processed in a variety of friction surface has hole, pit, storing certain oils, prolonged refueling time is five times that of copper sets;
Daily inspection work isneeded, Also paying attention to friction surface lubrication in time.
This innovative clutch facing protects the friction surface of the flywheel and significantly decreases wear and tear which contributes crucially to the economic efficiency of trucks.
In the tube the cigar is almost perfectly protected from contact shocks or damage to the wrapper because, inserted in a sheet of cedar-wood,it will not roll back and forth and also has hardly any of the friction surfaces found in cigar cases.
The function of lubricatingsystem is to provide sufficient oil on the friction surface of the diesel engine to reduce its wear and ensure its normal operation.
Solid lubrication bearing with slidingplate is a bearing matrix in the metal friction surface of the appropriate size, arranged in order of the holes, and then embedded in the holes with a unique self-lubrication performance of the shape of solid lubricant(solid lubricant area is generally 25% to 30% of the friction area) and made of self-lubrication bearing.
The lubrication principle of air compressor oil is to reduce friction The so called friction refers to theexistence of a relative contact surface called friction surface when two relative moving surfaces are displaced under the action of external force There are many kinds of friction phenomena including external.
Various oil grooves can be processed on the friction surface, and oil holes can store certain grease, so that the time of oil filling is 5 times longer than that of copper sleeve;
VSB20 abroad(DX) boundary lubrication bearing with high quality low carbon steel or copper plate as substrate,the middle sintered porous spherical bronze powder, the friction surface rolling modified polyformaldehyde(POM and Pb), and through the high temperature solid combination as one of the three layers of plasticizing boundary lubrication bearing materials(also called prelubricated bearing material), the rolling and sliding bearing.
Direct grease or oil supply with point-to-point, meeting the friction surface with high temperature and high temperature, such as bearings, bush shafts, large area bushings, etc.
The material can provide better bearing capacity and wear resistance, friction surface with oil pits, in the presence of a small amount of lubrication medium, its performance is better than other sliding bearing materials.