Examples of using Specific surface area in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
BET Specific surface area m²/g.
Rapid heated, larger specific surface area.
This creates very small suspended droplets orgas bubbles yielding a very high specific surface area.
The higher the content, the larger the material specific surface area(S0) and the lower the filtration speed.
Due to the high mechanical hardness,highly developed pore structure and huge specific surface area.
For this reason, the specific surface area of the phase boundary becomes influential for the chemical rate of reaction.
Slowly heated, perfect crystalline, smaller specific surface area.
Any question or interest about our High specific surface area grey densified micro silica fume hpc admixture admixture, please feel free to contact us.
It is a hydrophobic Fumed silica after treated with DDS(Dimethyldichlorosilane)based on a hydrophilic fumed silica with a specific surface area of 150m2/g.
The larger the flour particles, the smaller their specific surface area, which entails a reduction in the amount of water binding meal.
There are specific surface areas on hazardous waste containers, such as 55 gallon drums that are normally used for gripping, lifting and moving(for example, near the top and bottom rims).
Activated alumina defluoridation agent has a large specific surface area, good adsorption performance.
It has a large specific surface area, pore and micro pore structure are developed, with excellent adsorption performance, high strength, for organic or compound(VOCs) adsorption thoroughly, and easy to take off the attached.
Due to the high mechanical hardness,highly developed pore structure and huge specific surface area, it can be widely used in civil air defence works.
Due to highly developed porous structure and huge specific surface area, it has very strong adsorption capacity, which is widely used in industrial production, agriculture environmental Protection as Catalyst or catalyst carrier.
Polypropylene Cellulose Non WovenWipes have the characteristics of high porosity and large specific surface area, so it also has very good oil absorption performance.
Activated carbon has a microcrystalline structure with a completely irregular arrangement of crystallites with micropores(radius less than 20Å = 10-10 m), transition pores(20-1000Å) and large pores(greater than 1000Å in radius)Large inner surface, the specific surface area of 500 ~ 1700 m2/ g.
The effect of grinding section is to increase the specific surface area of the feed, which is beneficial to the digestion and absorption for the animals, improving materials processing performance.
Original grinding technology and cascade fall shaping technology are adopted to make the finished aggregates with reasonable grading and mellow grain shape,and effectively reduce the specific surface area and porosity of coarse and fine aggregates;
Due to the high mechanical hardness,highly developed pore structure and huge specific surface area, it can be widely used in gas-phase purification and adsorption, catalyst carrier, poison and security protection.
It has large pore specific surface area and specific volume, reasonable pore structure, good adsorption properties, high mechanical strength, good wear resistance, structural stability, small gas resistance, easy regeneration, low regeneration loss, low cost, not easy to break under high pressure and high temperature and other characteristics.
(3) Inorganic Fine Chemicals are mainly used to produce materials with new physical structures, such ascrystal structure, grain size, specific surface area, porous, pile density and other physical properties of different substances.
Fumed Alumina 100 FA 100 is a fine particulatepure aluminium oxide Al2O3 with high specific surface area and marked aggregate and agglomerate structure FA 100 lead to specific properties in various applications Applications 1 In fluorescent lamp to get homogeneous light emission reduce light attenuation to avoid.
Because it mainly uses polyester raw materials, the oil-wet andmelt spray cloth has the characteristics of high porosity and large specific surface area, so the melt spray cloth has good oil absorption performance.
Due to the high mechanical hardness,highly developed pore structure and huge specific surface area, low ash content, it can be widely used in both of gas-phase and fluid-phase purification and adsorption, catalyst carrier, poison and security protection.
Hard glass transparent or translucent particles with an average particle size of about 5 mm It has characteristics such as porosity andlarge specific surface area At low relative humidity there is a strong adsorption of water vapor It has selective.
KI Impregnated Pellet Activated Carbon is with high mechanical hardness,highly developed pore structure and huge specific surface area, it can be widely used in gas-phase purification and adsorption, catalyst carrier, poison and security protection.
This pigment variety gives neutral red and has two crystal types; transparent type is blue light red with light fastness of level 6; non-transparent type has light fastness of level 7; high hiding power;more stable to solvents; The specific surface area of 70 is 23m2/ g; it is mainly used for coatings, and can be mixed with molybdenum chromium orange and quinacridone; transparent type is recommended.
The basic carbon wil be pellet carbon with high mechanical hardness,highly developed pore structure and huge specific surface area, it can be widely used in gas-phase purification and adsorption, catalyst carrier, poison and security protection.
This series of products with false water alumina gel X- Rhoactivated alumina production fast removal method and continuouscarbonization method for the productionof components, made ofadvanced molding technology, high specific surface area, goodstability of compressive strength, low abrasion, proper pore structure, low content of impurities, the characteristics of active component impregnation properties good etc..