Examples of using Test cell in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Oil test cell with electrodes.
UP1000hdT with chilled test cell.
Each test cell sample should be subjected to only one crush.
UIP2000hdT with pressure-tight, chilled test cell.
Test cell: Glass, volume 300 to 500 ml, with protective cover and stirrer.
Circuited, the overdischarged into reversal test cells.
Test cell: Glass, volume 300 to 500 ml, with protective cover and stirrer.
Only the external short circuit test cells were functional.
Each test cell or component cell is to be subjected to one crush only.
Fire means that flames are emitted from the test cell or battery.".
Test cell can now be placed within the test crate on the support contacts.
As a standard Hielscher pressure-tight test cells for cavitation erosion testing are rated for up tp 5barg(73psig).
Crush test Cell is to be crushed between two flat surfaces, the crushing is to be continued until applied force of 13 kN, and once the maximum force has been obtained it is to be released.
Evaporative humidifiers maintain the humidity in the rolling road test cells at Jaguar Land Rover, Solihull, UK.
The test shall be conducted using test cells or component cells that have not previously been subjected to other tests.
Thanks to the particular construction of the cell holder directly placed on the pipeline where the fluid on which measurement can be carried out flows,it is possible to extract the test cell without interrupting the fluid flow.
Leverage TWO COOL® datafiles to string together process sequences or test cell configurations for total cost of ownership and capacity analysis.
The test cell used of the three-electrode structure in line with the international standard IEC, with electrode spacing 2mm, can eliminate the effects of the stray capacitance and leakage on dielectric loss test. .
The evaporative humidifiersprovide humidity control to two rolling-road engine test cells to ensure compliance with international environmental parameters.
The test should be performed in a test cell capable of withstanding fire and overpressure and, preferably, should be fitted with a pressure relief system e.g. a blow out panel.
The apparatus is equipped with the oil drainage solenoid switch,and we can empty the test cell in case of not removing it and rinse it with the test sample.
This heating method has the advantages of t non-contact between the test cell and the heating body, even heating, fast speed, convenient control, strict control of the temperature within error range of the preset temperature.
PRO COOL® allows the user to leverage their current TWO COOL® cost of ownership datafiles to string together process sequences or test cell configurations to provide the answers to key questions regarding cost, capacity, and bottlenecks.
To help ensure that ProCharger Marine products are the best available,ATI has invested in the industry's most powerful supercharger test cell, as well as a 1,600 hp dynometer and the largest company-owned fleet of test boats in the industry.
Amend the first sentence to read as follows:" Cells and batteries meet this requirement if there is no leakage, no venting, no disassembly, no rupture and no fire during the test and after the test and if the open circuit voltage of each test cell or battery directly after testing in its third perpendicular mounting position is not less than 90% of its voltage immediately prior to this procedure.".
It is very important that tests cell count cd4.
Straightpoint 55T Load Cell Test Machine.
Simplified Operation isactually achieved by using cradle colleagues for the test out cell.