Examples of using Internal diameter in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Internal diameter: 80mm.
It is steel tube of small internal diameter;
Internal diameter of coil.
Stator with same slot width and internal diameter can share one tooling.
Internal diameter at top: 304mm.
Continuous winding type, applicable to thickness of 3-20mm, internal diameter of 8mm or more, and external diameter of 200mm or less.
Internal diameter(mm): Phi 76mm.
Fiber Internal Diameter(mm).
Internal diameter: 12MM and 14MM.
Stator with same slot width and internal diameter can share one tooling, stroke of both ends of expanding blades is synchronous, no need two times expending, and expending blade stroke can be adjusted as per requirement;
Internal diameter of the nozzle: 6.3mm.
Internal diameter of coil: variable, 508 mm.
Internal diameter of coil: variable, from 450 mm to 530 mm.
Internal diameter of coil: variable, from 380 mm to 510 mm.
Internal diameter of coil: variable, from 470 mm to 520 mm.
Internal diameter of coil: variable, from 380 mm to 520 mm.
Internal diameter of coil: variable, from 470 mm to 510 mm.
Model internal diameter d External diameter D Width B Basic rated dynamic load Load direction Sealing part construction Fatigue load limit Reference speed Weight Basic static load rating.
Internal ring diameter: 2.75 mm.
Round style(internal filtration) diameter length applicable for.
Calculates the volume of concrete, internal volume and diameter of the ring, sizes and square wire mesh.
With a diameter of 25 cm At large distances between the internal walls of the external walls reinforce compressing or Korotyshev.
This device allows internal and external skiving of hydraulic hoses up to a 2" diameter.
A hydraulic pump activates the internal jacking system, so the effort required to tighten a very large diameter bolt is reduced to the effort needed to operate the pump.
In this process, Internal and external surfaces, two ends appearance, bending degree, fixed length, outer diameter and.
(1) cylinder: refers to the cylinder part of the drum, whose inner diameter and length are related to circulation mode, boiler capacity, steam parameters and internal equipment structure.
Stability chopped walls great extent achieved by placing internal capital(chopped) wall at a distance no more than 6.5 m when the diameter of the logs 22 cm and 8.5 m.
Testing internal surface of rings and tubes with diameters over 23mm.
That reduces the friction in the case of mud rotary drilling as the internal joint diameter is 44mm.
Wiring is possible with ultra-thin teflon cables with an external diameter of 1.48mm, making high density internal wiring possible.