What is the translation of " ALLOYING ELEMENTS " in Chinese?

• 合金元素

Examples of using Alloying elements in English and their translations into Chinese

Sometimes other alloying elements are added.
有时会添加其他合金元素。

It is precisely because of the variety of these added alloying elements.
这是因为这些添加剂合金元素的不同品种。

Low alloy steel(total alloying elements less than 5%).
低合金钢(合金元素总量低于5%)、.

It is precisely because of the variety of these added alloying elements.
正是由于这些添加的合金元素的品种不同。

High alloy Steel(total alloying elements are higher than 10%).
高合金钢(合金元素总量高于10%)。

Some steel also contains Mo, Cu, Nb, Ti, N and other alloying elements.
有些钢还含有Mo，Cu，Si，Nb，Ti，N等合金元素。

Alloying elements contain a slight amount of iron, resulting in a polishing effect.
合金元素中含有轻微的铁，产生一种抛光效果。

Some steel also contains Mo, Cu, Nb, Ti, N and other alloying elements.
一些钢还含有Mo，Cu，Si，Nb，Ti，N等合金元素。

In practical applications, appropriate alloying elements are often added to form different grades.
在实际应用中，常加入适当的合金元素形成不同牌号的。

Some steel also contains Mo, Cu, Nb, Ti, N and other alloying elements.
有些钢还含有Mo，Cu，Nb，Ti，Si，N和其他合金元素。

The main alloying elements, especially the interaction between chromium, molybdenum, nitrogen and nickel, are very complex.
主要的合金元素尤其是铬、钼、氮和镍之间的相互作用是非常复杂的。

Content of about 0.5% can reduce or inhibit the temper brittleness caused by other alloying elements.
含量约0.5%时，能降低或抑制其他合金元素导致的回火脆性。

This is a simple steel, which contains only two alloying elements: 0.95% carbon and 0.4% manganese.
这是一种较单纯的钢材，容易生锈，仅含有两种合金成分：0.95%的碳和0.4%的锰。

Most of the Fe-Cr-C Fe-Cr-Ni-C system based on stainless steel is based on, but is also important for other alloying elements.
大部分的不锈钢的fe-cr-c的fe-cr-ni-c系系统的基础上的，但也是很重要的其它合金元素。

Carbon content of 0.3 to 0.5%, and contains one or more alloying elements, with a lower or medium degree of alloying..
碳含量0.3－0.5%，并含有一种或几种合金元素，具有较低或中等的合金化程度。

In order to remove excess oxygen and adjust chemical composition in steel, oxygen absorber and ferroalloy or alloying elements can be added.
为了除去钢中过剩的氧及调整化学成份，可以添加脱氧剂和铁合金或合金元素。

Other alloying elements, such as Nickel and Molybdenum, can be added to change the structure, increase corrosion resistance and improve strength.
其他合金元素，如镍和钼，可以改变结构，增加耐腐蚀性和提高强度。

Most of the stainless steels are based on the Fe-Cr-C and Fe-Cr-Ni-C systems, but other alloying elements are also important.
大部分的不锈钢的fe-cr-c的fe-cr-ni-c系系统的基础上的，但也是很重要的其它合金元素。

Total alloying elements generally less than 5%, has a larger impact toughness, and can get better mechanical properties by heat treatment.
合金元素总量一般小于5%，具有较大的冲击韧性，并能通过热处理获得更好的机械性能。

Each of these has specific properties and has been developed for specific applications, or even in an attempt to avoid using expensive alloying elements.
其中每一种都具有特定的性能，并且针对特定应用开发，或者是试图避免使用昂贵的合金元素。

Although other alloying elements can achieve similar metallurgical effects, but the weight percentage, the role of molybdenum is most obvious.
尽管其他合金元素也可达到类似的冶金效果，但就重量百分比而言，钼的作用最为明显。

Appropriate to increase the carbon content of manganese and add trace vanadium, titanium, niobium and other alloying elements, can greatly improve the strength of steel.
适当增加碳钢中锰含量，并加入微量钒、钛、铌等合金元素，可大大提高钢的强度。

Carbon and other alloying elements are too late to precipitate, and a pure austenite structure is obtained, which is called solution treatment.
碳和其他合金元素为时已晚，无法沉淀，因此获得了纯奥氏体结构，这称为固溶处理。

Titanium as a structural material has good mechanical properties, which is achieved by strictly controlling the content of appropriate impurities and adding alloying elements.
钛作为结构材料所具有的良好机械性能，就是通过严格控制其中适当的杂质含量和添加合金元素而达到的。

According to the variety of alloying elements added in steel, we can simply divide steel into three categories: carbon steel. alloy steel. stainless steel.
按照钢中添加的合金元素品种的不同，我们可将钢简单地分为三大类：碳钢。

The other 70% of the manganese is used purely as an alloying element.
剩余70%的锰完全作为合金元素来利用。

The addition of iron as an alloy element also increases the ductility of chromium.
添加铁作为合金元素也会增加铬的延展性。

The 5052 aluminum plate is an aluminum-magnesium alloy and the main alloying element is magnesium.
铝合金板是钛镁铝合金，关键铝合金原素是镁。

The 4000 series of aluminum alloy plates with silicon as the alloying element is not widely used at present.
系列是铝合金板，以硅为合金元素，目前尚未广泛使用。

Different types and amounts of alloying element used determine the hardness, ductility and tensile strength of steel.
使用的不同类型和数量的合金元素决定了钢的硬度，延展性和抗拉强度。