Examples of using Flowmeter in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
TVA Flowmeter for Saturated and Superheated Steam Service.
Instruments for measuring fluid flow are collectively referred to as flowmeter or flow meter.
Turbine flowmeters can accurately measure clean liquids and gases.
In addition, the measurement line ultrasonic flowmeter complex than the general flow meter.
Ultrasonic flowmeter sales in this area nearly doubled than before.
Air barrel pressure gauge reduced to 0kg/ cm2G,then remove the orifice group flowmeter.
Electromagnetic flowmeter is widely used in sewage treatment stations environmental sewage.
Widely used in industrial production is thetemperature pressure compensation type mass flowmeter.
(1) Electromagnetic flowmeters can be used to measure industrial conductive liquids or slurries.
Before and after 1955, the former Soviet Union, Britain,Germany also succeeded in producing electromagnetic flowmeter.
Of the three types, the subsea multiphase flowmeter market is projected to grow most rapidly.
Like many other flowmeters, this ultrasonic flowmeter should be installed upstream of elbows, valves, or reducers.
In the 17th century,torricelli laid the theoretical foundation of differential pressure flowmeter, which was a milestone in flow measurement.
(4) the portable ultrasonic flowmeter can be used to measure the flow in pipes of various diameters and materials.
The installation and maintenance of the instrument can not affect the operation of the production pipeline andis an ideal energy-saving flowmeter.
This flowmeter does not obstruct flow, so it can be applied to clean, sanitary, dirty, corrosive and abrasive liquids.
Flow Research also publishes quarterly reports on the flowmeter and energy markets as part of the Worldflow Monitoring Service.
This flowmeter can be applied to sanitary, relatively clean, and corrosive liquids in sizes up to approximately 24 inches.
With the continuous development of science and technology, ultrasonic flowmeter applications gradually wide, and are ideal for flow measurement.
When it is installed within 30 meters or within 100 meters of the sensor,the connection between the two is called a separate electromagnetic flowmeter.
The accuracy of the turbine flowmeter output by the electric pulse signal is high, and the general error is±0.2% to 0.5%.
From 2011 to 2017,Asia-Pacific is also forecast to be the fastest-expanding region for flowmeter sales with a compound annual growth rate(CAGR) of 10.5 percent.
This dramatically decreases flowmeter accuracy(to within only±20%), and, in most cases, clamp-on meters will not work at all if the pipe is lined.
The third category, China's own research and development of high profile products, representative products such as decentralized control system(DCS)and electromagnetic flowmeter.
Similarly, excessive temperature in magnetic flowmeters(even briefly under abnormal conditions)can result in permanent flowmeter damage.
The third category, China's own research and development of high profile products, representative products such as decentralized control system(DCS)and electromagnetic flowmeter.
Typical impeller flowmeter is a water meter and turbine flowmeter, the structure can be mechanical transmission output or electric pulse output type.
Flowmeter with the development of modern industry is necessary to gradually improve its performance, and technological progress also makes the flow meter perfect possible.
Electromagnetic flowmeter has a series of excellent features, can solve other flowmeter difficult to solve the problem, such as dirty sewage, corrosion flow measurement.
Electromagnetic flowmeter has a series of excellent features, can solve other flowmeter difficult to solve the problem, such as dirty sewage, corrosion flow measurement.